12C Oracle ASM Filter Driver

栏目: 数据库 · Oracle · 发布时间: 6年前

内容简介:Oracle ASM Filter Driver(Oracle ASMFD)消除了在系统每次被重启后Oracle ASM需要重新绑定磁盘设备来简化对磁盘设备的配置与管理。Oracle ASM Filter Driver(Oracle ASMFD)是一种内置在Oracle ASM磁盘的IO路径中的内核模块。Oracle ASM使用filter driver来验证对Oracle ASM磁盘的写IO操作。Oracle ASM Filter Driver会拒绝任何无效的IO请求。这种操作消除了意外覆盖Oracle

Oracle ASM Filter Driver(Oracle ASMFD)消除了在系统每次被重启后Oracle ASM需要重新绑定磁盘设备来简化对磁盘设备的配置与管理。Oracle ASM Filter Driver(Oracle ASMFD)是一种内置在Oracle ASM磁盘的IO路径中的内核模块。Oracle ASM使用filter driver来验证对Oracle ASM磁盘的写IO操作。Oracle ASM Filter Driver会拒绝任何无效的IO请求。这种操作消除了意外覆盖Oracle ASM磁盘而损坏磁盘组中的磁盘与文件。例如,Oracle ASM Filter Driver会过滤掉所有可能意外覆盖磁盘的非Oracle IO操作。从Oracle 12.2开始,Oracle ASM Filter Driver(Oracle ASMFD)在系统安装Oracle ASMLIB的情况下不能被安装,如果你想安装与配置Oracle ASMFD,那么必须首先卸载Oracle ASMLIB。Oracle 12.2的ASMFD不支持扩展分区表。

配置Oracle ASM Filter Driver

可以在安装Oracle Grid Infrastructure时或在安装Oracle Grid Infrastructure后对磁盘设备永久性配置Oracle ASM Filter Driver(Oracle ASMFD)。

在安装Oracle Grid Infrastructure时配置Oracle ASM Filter Driver

在安装Oracle Grid Infrastructure时,可以选择启用自动安装与配置Oracle ASM Filter Driver。如果在安装Oracle Grid Infrastructure所在的系统中没有使用udev,那么可以在在安装Oracle Grid Infrastructure之前执行下面的操作来为Oracle ASMFD准备磁盘。下面的操作必须在Oracle Grid Infrastructure软件包在Oracle Grid Infrastructure home目录中必须解压后,但在配置ASMFD之前执行。

1.为了使用Oracle ASM Filter Driver来配置共享磁盘,以root用户来设置环境变量$ORACLE_HOME为Grid Home目录,设置环境变量$ORACLE_BASE为临时目录

# set ORACLE_HOME=/u01/app/oracle/12.2.0/grid
# set ORACLE_BASE=/tmp

ORACLE_BASE变量被设置为临时目录可以避免在安装Oracle Grid Infrastructure之前在Grid Home目录中创建诊断或跟踪文件。在执行下面的操作之前,确保是在$ORACLE_HOME/bin目录中执行命令。

2.使用ASMCMD afd_label命令来为Oracle ASM Filter Driver来准备磁盘.

#asmcmd afd_label DATA1 /dev/disk1a --init

3.使用ASMCMD afd_lslbl命令来验证磁盘是否已经被标记可以为Oracle ASMFD所使用

#asmcmd afd_lslbl /dev/disk1a

查看某块磁盘

[rootd@cs1 ~]./asmcmd afd_lslbl /dev/asmdisk01
--------------------------------------------------------------------------------
Label                     Duplicate  Path
================================================================================
CRS2                                  /dev/asmdisk01

列出已经标记可以为Oracle ASMFD所使用的所有磁盘

[grid@jytest1 ~]$ asmcmd afd_lslbl 
--------------------------------------------------------------------------------
Label                     Duplicate  Path
================================================================================
CRS1                                  /dev/asmdisk02
CRS2                                  /dev/asmdisk01
DATA1                                 /dev/asmdisk03
DATA2                                 /dev/asmdisk04
FRA1                                  /dev/asmdisk07
TEST1                                 /dev/asmdisk05
TEST2                                 /dev/asmdisk06

4.当为Oracle ASMFD准备完磁盘后清除变量ORACLE_BASE

# unset ORACLE_BASE

5.运行安装脚本(gridSetup.sh)来安装Oracle Grid Infrastructure并启用Oracle ASM Filter Driver配置。

在安装Oracle Grid Infrastructure后配置Oracle ASM Filter Driver

如果在安装Grid Infrastructure时没有启用配置Oracle ASMFD,那么可以使用Oracle ASMFD来手动配置Oracle ASM设备。

为Oracle Grid Infrastructure Clusterware环境配置Oracle ASM,具体操作如下:

1.以Oracle Grid Infrastructure用户来更新Oracle ASM磁盘发现路径来使Oracle ASMFD来发现磁盘。

首先检查当前Oracle ASM磁盘发现路径并更新

[grid@cs1 ~]$ asmcmd dsget
parameter:/dev/sd*, /dev/asm* 
profile:/dev/sd*,/dev/asm*

将’AFD:*’增加到发现磁盘路径中

[grid@cs1 ~]$ asmcmd dsset 'dev/sd*','/dev/asm*','AFD:*'
[grid@cs1 ~]$ asmcmd dsget
parameter:dev/sd*, /dev/asm*, AFD:*
profile:dev/sd*,/dev/asm*,AFD:*

2.以Oracle Grid Infrastructure用户来获取cluster中的节点列表与角色

[grid@cs1 ~]$ olsnodes -a
cs1     Hub
cs2     Hub

3.在每个Hub与Leaf节点上,可以以回滚或非回滚模式来执行以下操作

3.1以root用户来停止Oracle Grid Infrastructure

# $ORACLE_HOME/bin/crsctl stop crs

如果命令返回错误,那么执行下面的命令来强制停止Oracle Grid Infrastructure

# $ORACLE_HOME/bin/crsctl stop crs -f

3.2在节点层面以root用户来配置Oracle ASMFD

# $ORACLE_HOME/bin/asmcmd afd_configure

3.3以Oracle Grid Infrastructure用户来验证Oracle ASMFD的状态

[grid@cs2 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'cs2.jy.net'

3.4以root用户来启动Oracle Clusterware stack

# $ORACLE_HOME/bin/crsctl start crs

3.5以Oracle Grid Infrastructure用户来设置Oracle ASMFD发现磁盘路径为步骤3.1中所检索到的原始Oracle ASM磁盘发现路径

[grid@cs1 ~]$ asmcmd dsset 'dev/sd*','/dev/asm*'

迁移不包含OCR或vote文件的磁盘组到Oracle ASMFD

1.以Oracle Grid Infrastructure用户来执行以下操作

2.列出已经存在的磁盘组

[grid@cs2 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Logical_Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  EXTERN  N         512             512   4096  4194304     40960     1544                0            1544              0             Y  CRS/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960      860                0             860              0             N  DATA/
MOUNTED  NORMAL  N         512             512   4096  4194304     40960    40704                0           20352              0             N  DN/

3.列出相关磁盘

[grid@cs2 ~]$ asmcmd lsdsk -G DN
Path
/dev/asmdisk03
/dev/asmdisk05

从下面的查询可以看到/dev/asmdisk03和/dev/asmdisk05的label字段为空

SQL> select group_number,disk_number,name,label,path from v$asm_disk;

GROUP_NUMBER DISK_NUMBER NAME                           LABEL                                              PATH
------------ ----------- ------------------------------ -------------------------------------------------- --------------------------------------------------
           0           0                                CRS2                                               /dev/asmdisk01
           0           1                                CRS1                                               /dev/asmdisk02
           0           2                                DATA1                                              /dev/asmdisk04
           3           0 DN_0000                                                                           /dev/asmdisk03
           3           1 DN_0001                                                                           /dev/asmdisk05
           1           0 CRS1                           CRS1                                               AFD:CRS1
           2           0 DATA1                          DATA1                                              AFD:DATA1
           1           1 CRS2                           CRS2                                               AFD:CRS2

4.检查Oracle ASM是否是活动状态

[grid@cs2 ~]$ srvctl status asm
ASM is running on cs1,cs2

5.在所有节点上停止数据库与dismount磁盘组

[grid@cs2 ~]$srvctl stop diskgroup -diskgroup DN -f

6.在每个Hub节点上执行以下命令来为磁盘组中的所有已经存在的磁盘进行标记

[grid@cs2 ~]$ asmcmd afd_label DN1 /dev/asmdisk03 --migrate
[grid@cs2 ~]$ asmcmd afd_label DN2 /dev/asmdisk05 --migrate

7.在所有Hub节点上扫描磁盘

[grid@cs1 ~]$ asmcmd afd_scan
[grid@cs2 ~]$ asmcmd afd_scan

8.在所有节点启动数据库并mount磁盘组

[grid@cs2 ~]$ srvctl start diskgroup -diskgroup DN

从下面的查询可以看到/dev/asmdisk03和/dev/asmdisk05的label字段分别显示为DN1和DN2

SQL> select group_number,disk_number,name,label,path from v$asm_disk;

GROUP_NUMBER DISK_NUMBER NAME                           LABEL                                              PATH
------------ ----------- ------------------------------ -------------------------------------------------- --------------------------------------------------
           0           0                                CRS2                                               /dev/asmdisk01
           0           1                                DN2                                                /dev/asmdisk05
           0           2                                DN1                                                /dev/asmdisk03
           0           3                                CRS1                                               /dev/asmdisk02
           0           4                                DATA1                                              /dev/asmdisk04
           1           1 CRS2                           CRS2                                               AFD:CRS2
           2           0 DATA1                          DATA1                                              AFD:DATA1
           1           0 CRS1                           CRS1                                               AFD:CRS1
           3           0 DN_0000                        DN1                                                AFD:DN1
           3           1 DN_0001                        DN2                                                AFD:DN2

现在可以将原先的 udev rules 文件移除。当然,这要在所有节点中都运行。以后如果服务器再次重启,AFD 就会完全接管了。

[root@cs1 bin]# cd /etc/udev/rules.d/
[root@cs1 rules.d]# ls -lrt
total 16
-rw-r--r--. 1 root root  709 Mar  6  2015 70-persistent-ipoib.rules
-rw-r--r--  1 root root 1416 Mar  9 12:23 99-my-asmdevices.rules
-rw-r--r--  1 root root  224 Mar  9 15:52 53-afd.rules
-rw-r--r--  1 root root  190 Mar  9 15:54 55-usm.rules

[root@cs1 rules.d]# mv 99-my-asmdevices.rules 99-my-asmdevices.rules.bak

[root@cs1 rules.d]# cat 53-afd.rules
#
# AFD devices
KERNEL=="oracleafd/.*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/disks/*", OWNER="grid", GROUP="asmadmin", MODE="0664"


[root@cs1 rules.d]# ls -l /dev/oracleafd/disks
total 20
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 CRS1
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 CRS2
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 DATA1
-rwxrwx--- 1 grid oinstall 15 Aug 30 17:42 DN1
-rwxrwx--- 1 grid oinstall 15 Aug 30 17:42 DN2

[root@cs2 bin]# cd /etc/udev/rules.d/
[root@cs2 rules.d]# ls -lrt
total 16
-rw-r--r--. 1 root root  709 Mar  6  2015 70-persistent-ipoib.rules
-rw-r--r--  1 root root 1416 Mar  9 12:23 99-my-asmdevices.rules
-rw-r--r--  1 root root  224 Mar  9 15:52 53-afd.rules
-rw-r--r--  1 root root  190 Mar  9 15:54 55-usm.rules

[root@cs2 rules.d]# mv 99-my-asmdevices.rules 99-my-asmdevices.rules.bak

[root@cs2 rules.d]# cat 53-afd.rules
#
# AFD devices
KERNEL=="oracleafd/.*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/disks/*", OWNER="grid", GROUP="asmadmin", MODE="0664"


[root@cs2 rules.d]# ls -l /dev/oracleafd/disks
total 20
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 CRS1
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 CRS2
-rwxrwx--- 1 grid oinstall 15 Aug 30 14:30 DATA1
-rwxrwx--- 1 grid oinstall 15 Aug 30 17:42 DN1
-rwxrwx--- 1 grid oinstall 15 Aug 30 17:42 DN2

其实,AFD 也在使用 udev

迁移包含OCR或vote文件的磁盘组到Oracle ASMFD

1.以root用户来列出包含OCR和vote文件的磁盘组

[root@cs1 ~]# cd /u01/app/product/12.2.0/crs/bin
[root@cs1 bin]# sh ocrcheck -config
Oracle Cluster Registry configuration is :
         Device/File Name         :       +CRS
         Device/File Name         :      +DATA
[root@cs1 bin]# sh crsctl query css votedisk
##  STATE    File Universal Id                File Name Disk group
--  -----    -----------------                --------- ---------
 1. ONLINE   750a78e1ae984fcdbfb4dbf44d337a77 (/dev/asmdisk02) [CRS]
Located 1 voting disk(s).

2.以Oracle Grid Infrastructure用户来列出与磁盘组相关的磁盘

[grid@cs2 ~]$ asmcmd lsdsk -G CRS
Path
/dev/asmdisk01
/dev/asmdisk02

3.以root用户来在所有节点上停止数据库与Oracle Clusterware

[root@cs1 bin]# ./crsctl stop cluster -all
CRS-2673: Attempting to stop 'ora.crsd' on 'cs2'
CRS-2673: Attempting to stop 'ora.crsd' on 'cs1'
CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on server 'cs2'
CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on server 'cs1'
CRS-2673: Attempting to stop 'ora.cs.db' on 'cs1'
CRS-2673: Attempting to stop 'ora.qosmserver' on 'cs2'
CRS-2673: Attempting to stop 'ora.cs.db' on 'cs2'
CRS-2673: Attempting to stop 'ora.chad' on 'cs2'
CRS-2673: Attempting to stop 'ora.gns' on 'cs2'
CRS-2677: Stop of 'ora.gns' on 'cs2' succeeded
CRS-2677: Stop of 'ora.cs.db' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.CRS.dg' on 'cs2'
CRS-2673: Attempting to stop 'ora.DATA.dg' on 'cs2'
CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'cs2'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'cs2'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'cs2'
CRS-2673: Attempting to stop 'ora.cvu' on 'cs2'
CRS-2673: Attempting to stop 'ora.gns.vip' on 'cs2'
CRS-2677: Stop of 'ora.cs.db' on 'cs1' succeeded
CRS-2677: Stop of 'ora.CRS.dg' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'cs1'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'cs1'
CRS-2677: Stop of 'ora.DATA.dg' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'cs2'
CRS-2677: Stop of 'ora.asm' on 'cs2' succeeded
CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.ASMNET1LSNR_ASM.lsnr' on 'cs2'
CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.scan1.vip' on 'cs1'
CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'cs2' succeeded
CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'cs2' succeeded
CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'cs2' succeeded
CRS-2677: Stop of 'ora.scan1.vip' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.cs2.vip' on 'cs2'
CRS-2673: Attempting to stop 'ora.scan2.vip' on 'cs2'
CRS-2673: Attempting to stop 'ora.scan3.vip' on 'cs2'
CRS-2677: Stop of 'ora.gns.vip' on 'cs2' succeeded
CRS-2677: Stop of 'ora.scan3.vip' on 'cs2' succeeded
CRS-2677: Stop of 'ora.cs2.vip' on 'cs2' succeeded
CRS-2677: Stop of 'ora.qosmserver' on 'cs2' succeeded
CRS-2677: Stop of 'ora.scan2.vip' on 'cs2' succeeded
CRS-2677: Stop of 'ora.ASMNET1LSNR_ASM.lsnr' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.chad' on 'cs1'
CRS-2677: Stop of 'ora.cvu' on 'cs2' succeeded
CRS-2677: Stop of 'ora.chad' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.ons' on 'cs2'
CRS-2677: Stop of 'ora.ons' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.net1.network' on 'cs2'
CRS-2677: Stop of 'ora.net1.network' on 'cs2' succeeded
CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'cs2' has completed
CRS-2677: Stop of 'ora.crsd' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'cs2'
CRS-2673: Attempting to stop 'ora.evmd' on 'cs2'
CRS-2673: Attempting to stop 'ora.storage' on 'cs2'
CRS-2677: Stop of 'ora.storage' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'cs2'
CRS-2677: Stop of 'ora.ctssd' on 'cs2' succeeded
CRS-2677: Stop of 'ora.evmd' on 'cs2' succeeded
CRS-2677: Stop of 'ora.chad' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.mgmtdb' on 'cs1'
CRS-2677: Stop of 'ora.mgmtdb' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.MGMTLSNR' on 'cs1'
CRS-2673: Attempting to stop 'ora.CRS.dg' on 'cs1'
CRS-2673: Attempting to stop 'ora.DATA.dg' on 'cs1'
CRS-2677: Stop of 'ora.CRS.dg' on 'cs1' succeeded
CRS-2677: Stop of 'ora.DATA.dg' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'cs1'
CRS-2677: Stop of 'ora.MGMTLSNR' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.cs1.vip' on 'cs1'
CRS-2677: Stop of 'ora.cs1.vip' on 'cs1' succeeded
CRS-2677: Stop of 'ora.asm' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'cs2'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'cs2' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'cs2'
CRS-2677: Stop of 'ora.cssd' on 'cs2' succeeded
CRS-2677: Stop of 'ora.asm' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.ASMNET1LSNR_ASM.lsnr' on 'cs1'
CRS-2677: Stop of 'ora.ASMNET1LSNR_ASM.lsnr' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.ons' on 'cs1'
CRS-2677: Stop of 'ora.ons' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.net1.network' on 'cs1'
CRS-2677: Stop of 'ora.net1.network' on 'cs1' succeeded
CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'cs1' has completed
CRS-2677: Stop of 'ora.crsd' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'cs1'
CRS-2673: Attempting to stop 'ora.evmd' on 'cs1'
CRS-2673: Attempting to stop 'ora.storage' on 'cs1'
CRS-2677: Stop of 'ora.storage' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'cs1'
CRS-2677: Stop of 'ora.ctssd' on 'cs1' succeeded
CRS-2677: Stop of 'ora.evmd' on 'cs1' succeeded
CRS-2677: Stop of 'ora.asm' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'cs1'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'cs1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'cs1'
CRS-2677: Stop of 'ora.cssd' on 'cs1' succeeded

4.以Oracle Grid Infrastructure用户来执行下面的命令为每个Hub节点上的磁盘组中的磁盘进行标记

[grid@cs2 ~]$ asmcmd afd_label DN1 /dev/asmdisk03
[grid@cs2 ~]$ asmcmd afd_label DN2 /dev/asmdisk05

5.以Oracle Grid Infrastructure用户来执行下面的命令对每个Hub节点进行磁盘重新扫描

[grid@cs1 ~]$ asmcmd afd_scan
[grid@cs2 ~]$ asmcmd afd_scan

6.以root用户来在所有节点上启用Oracle Clusterware stack并mount OCR与vote文件磁盘与数据库

[root@cs1 bin]# ./crsctl start cluster -all
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'cs1'
CRS-2672: Attempting to start 'ora.evmd' on 'cs1'
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'cs2'
CRS-2672: Attempting to start 'ora.evmd' on 'cs2'
CRS-2676: Start of 'ora.cssdmonitor' on 'cs1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'cs1'
CRS-2672: Attempting to start 'ora.diskmon' on 'cs1'
CRS-2676: Start of 'ora.diskmon' on 'cs1' succeeded
CRS-2676: Start of 'ora.evmd' on 'cs1' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'cs2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'cs2'
CRS-2672: Attempting to start 'ora.diskmon' on 'cs2'
CRS-2676: Start of 'ora.diskmon' on 'cs2' succeeded
CRS-2676: Start of 'ora.evmd' on 'cs2' succeeded
CRS-2676: Start of 'ora.cssd' on 'cs1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'cs1'
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'cs1'
CRS-2676: Start of 'ora.cssd' on 'cs2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'cs2'
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'cs2'
CRS-2676: Start of 'ora.ctssd' on 'cs1' succeeded
CRS-2676: Start of 'ora.ctssd' on 'cs2' succeeded
CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'cs1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'cs1'
CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'cs2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'cs2'
CRS-2676: Start of 'ora.asm' on 'cs2' succeeded
CRS-2672: Attempting to start 'ora.storage' on 'cs2'
CRS-2676: Start of 'ora.asm' on 'cs1' succeeded
CRS-2672: Attempting to start 'ora.storage' on 'cs1'
CRS-2676: Start of 'ora.storage' on 'cs1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'cs1'
CRS-2676: Start of 'ora.crsd' on 'cs1' succeeded
CRS-2676: Start of 'ora.storage' on 'cs2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'cs2'
CRS-2676: Start of 'ora.crsd' on 'cs2' succeeded

判断Oracle ASM Filter Driver是否已经配置

可以通过判断Oracle ASM实例的SYS_ASMFD_PROPERTIES的AFD_STATE参数值来判断Oracle ASMFD是否被配置。也可以使用ASMCMD afd_state命令来检查Oracle ASMFD的状态

[grid@cs1 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'DISABLED' on host 'cs1.jy.net'

[grid@cs2 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'cs2.jy.net'

下面的查询如果AFD_STATE参数值等于NOT AVAILABLE就表示Oracle ASMFD没有被配置

SQL> select sys_context('SYS_ASMFD_PROPERTIES', 'AFD_STATE') from dual;

SYS_CONTEXT('SYS_ASMFD_PROPERTIES','AFD_STATE')
--------------------------------------------------------------------------- 
CONFIGURED

设置Oracle ASM Filter Driver的AFD_DISKSTRING参数

AFD_DISKSTRING参数来指定Oracle ASMFD磁盘发现路径来标识由Oracle ASMFD来管理的磁盘。也可以使用ASMCMD afd_dsset和afd_dsget命令来设置和显示AFD_DISKSTRING参数:

[grid@cs1 ~]$ asmcmd afd_dsset '/dev/sd*','/dev/asm*','AFD:*'

[grid@cs2 ~]$ asmcmd afd_dsset '/dev/sd*','/dev/asm*','AFD:*'

[grid@cs1 ~]$ asmcmd dsget
parameter:dev/sd*, /dev/asm*, AFD:*
profile:dev/sd*,/dev/asm*,AFD:*

[grid@cs2 ~]$ asmcmd dsget
parameter:dev/sd*, /dev/asm*, AFD:*
profile:dev/sd*,/dev/asm*,AFD:*

可以使用alter system语句来设置AFD_DISKSTRING。标识已经被创建在磁盘头中通过Oracle ASMFD磁盘发现路径来识别磁盘

SQL> ALTER SYSTEM AFD_DISKSTRING SET 'dev/sd*','/dev/asm*','AFD:*';
System altered.

SQL> SELECT SYS_CONTEXT('SYS_ASMFD_PROPERTIES', 'AFD_DISKSTRING') FROM DUAL;

SYS_CONTEXT('SYS_ASMFD_PROPERTIES','AFD_DISKSTRING')
----------------------------------------------------------------------------------- 
dev/sd*,/dev/asm*,AFD:*

为Oracle ASM Filter Driver磁盘设置Oracle ASM ASM_DISKSTRING参数

可以更新Oracle ASM磁盘发现路径来增加或删除Oracle ASMFD 磁盘标识名到ASM_DISKSTRING参数,可以使用alter system语句或asmcmd dsset命令

SQL> show parameter asm_diskstring

NAME                                 TYPE                   VALUE
------------------------------------ ---------------------- ------------------------------
asm_diskstring                       string                 dev/sd*, /dev/asm*, AFD:*

[grid@cs1 ~]$  asmcmd dsset 'dev/sd*','/dev/asm*','AFD:*'
[grid@cs2 ~]$ asmcmd dsset 'dev/sd*','/dev/asm*','AFD:*'

测试Filter功能

首先检查filter功能是否开启

[grid@cs1 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'cs1.jy.net'

[grid@jytest1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk03
DATA2                       ENABLED   /dev/asmdisk04
FRA1                        ENABLED   /dev/asmdisk07
TEST1                       ENABLED   /dev/asmdisk05
TEST2                       ENABLED   /dev/asmdisk06

上面的结果显示filter功能已经开启,如果要禁用filter功能执行asmcmd afd_filter -d

[grid@cs1 ~]$ asmcmd afd_filter -d
[grid@cs1 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'jytest1.jydba.net'
[grid@cs1 ~]$ asmcmd afd_lsdsk
There are no labelled devices.

如果要开启filter功能执行asmcmd afd_filter -e

[grid@jytest1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk03
DATA2                       ENABLED   /dev/asmdisk04
FRA1                        ENABLED   /dev/asmdisk07
TEST1                       ENABLED   /dev/asmdisk05
TEST2                       ENABLED   /dev/asmdisk06

先用 KFED 读取一下TEST磁盘组的AFD:TEST1的磁盘头,验证一下确实无误

[grid@jytest1 ~]$ kfed read AFD:TEST1
kfbh.endian:                          1 ; 0x000: 0x01
kfbh.hard:                          130 ; 0x001: 0x82
kfbh.type:                            1 ; 0x002: KFBTYP_DISKHEAD
kfbh.datfmt:                          1 ; 0x003: 0x01
kfbh.block.blk:                       0 ; 0x004: blk=0
kfbh.block.obj:              2147483648 ; 0x008: disk=0
kfbh.check:                  3275580027 ; 0x00c: 0xc33d627b
kfbh.fcn.base:                        0 ; 0x010: 0x00000000
kfbh.fcn.wrap:                        0 ; 0x014: 0x00000000
kfbh.spare1:                          0 ; 0x018: 0x00000000
kfbh.spare2:                          0 ; 0x01c: 0x00000000
kfdhdb.driver.provstr:    ORCLDISKTEST1 ; 0x000: length=13
kfdhdb.driver.reserved[0]:   1414743380 ; 0x008: 0x54534554
kfdhdb.driver.reserved[1]:           49 ; 0x00c: 0x00000031
kfdhdb.driver.reserved[2]:            0 ; 0x010: 0x00000000
kfdhdb.driver.reserved[3]:            0 ; 0x014: 0x00000000
kfdhdb.driver.reserved[4]:            0 ; 0x018: 0x00000000
kfdhdb.driver.reserved[5]:            0 ; 0x01c: 0x00000000
kfdhdb.compat:                203424000 ; 0x020: 0x0c200100
kfdhdb.dsknum:                        0 ; 0x024: 0x0000
kfdhdb.grptyp:                        2 ; 0x026: KFDGTP_NORMAL
kfdhdb.hdrsts:                        3 ; 0x027: KFDHDR_MEMBER
kfdhdb.dskname:                   TEST1 ; 0x028: length=5
kfdhdb.grpname:                    TEST ; 0x048: length=4
kfdhdb.fgname:                    TEST1 ; 0x068: length=5
kfdhdb.fgname:                      DN1 ; 0x068: length=3

下面直接用dd尝试将磁盘头清零。dd 命令本身没有任何错误返回。

[root@cs1 ~]# dd if=/dev/zero of=/dev/asmdisk03 bs=1024 count=10000
10000+0 records in
10000+0 records out
10240000 bytes (10 MB) copied, 1.24936 s, 8.2 MB/s

备份磁盘的前1024字节并清除,普通用户没权限读

[root@jytest1 ~]# dd if=/dev/asmdisk05 of=asmdisk05_header bs=1024 count=1
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.000282638 s, 3.6 MB/s
[root@jytest1 ~]# ls -lrt
 
-rw-r--r--  1 root root 1024 Aug 31 01:22 asmdisk05_header


[root@jytest1 ~]# dd if=/dev/zero of=/dev/asmdisk05 bs=1024 count=1
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.000318516 s, 3.2 MB/s
再用 KFED 读取一下TEST磁盘组的AFD:TEST1的磁盘头,验证一下确实无误
[grid@jytest1 ~]$ kfed read AFD:TEST1
kfbh.endian:                          1 ; 0x000: 0x01
kfbh.hard:                          130 ; 0x001: 0x82
kfbh.type:                            1 ; 0x002: KFBTYP_DISKHEAD
kfbh.datfmt:                          1 ; 0x003: 0x01
kfbh.block.blk:                       0 ; 0x004: blk=0
kfbh.block.obj:              2147483648 ; 0x008: disk=0
kfbh.check:                  3275580027 ; 0x00c: 0xc33d627b
kfbh.fcn.base:                        0 ; 0x010: 0x00000000
kfbh.fcn.wrap:                        0 ; 0x014: 0x00000000
kfbh.spare1:                          0 ; 0x018: 0x00000000
kfbh.spare2:                          0 ; 0x01c: 0x00000000
kfdhdb.driver.provstr:    ORCLDISKTEST1 ; 0x000: length=13
kfdhdb.driver.reserved[0]:   1414743380 ; 0x008: 0x54534554
kfdhdb.driver.reserved[1]:           49 ; 0x00c: 0x00000031
kfdhdb.driver.reserved[2]:            0 ; 0x010: 0x00000000
kfdhdb.driver.reserved[3]:            0 ; 0x014: 0x00000000
kfdhdb.driver.reserved[4]:            0 ; 0x018: 0x00000000
kfdhdb.driver.reserved[5]:            0 ; 0x01c: 0x00000000
kfdhdb.compat:                203424000 ; 0x020: 0x0c200100
kfdhdb.dsknum:                        0 ; 0x024: 0x0000
kfdhdb.grptyp:                        2 ; 0x026: KFDGTP_NORMAL
kfdhdb.hdrsts:                        3 ; 0x027: KFDHDR_MEMBER
kfdhdb.dskname:                   TEST1 ; 0x028: length=5
kfdhdb.grpname:                    TEST ; 0x048: length=4
kfdhdb.fgname:                    TEST1 ; 0x068: length=5

测试dismount磁盘组TEST,再mount磁盘组TEST都能成功

[grid@jytest1 ~]$ asmcmd umount TEST
[grid@jytest1 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Logical_Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  EXTERN  N         512             512   4096  4194304     40960      264                0             264              0             Y  CRS/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    24732                0           24732              0             N  DATA/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    18452                0           18452              0             N  FRA/
[grid@jytest1 ~]$ asmcmd mount TEST
[grid@jytest1 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Logical_Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  EXTERN  N         512             512   4096  4194304     40960      264                0             264              0             Y  CRS/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    24732                0           24732              0             N  DATA/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    18452                0           18452              0             N  FRA/
MOUNTED  NORMAL  N         512             512   4096  4194304     40960    11128                0            5564              0             N  TEST/

现在对磁盘/dev/asmdisk05禁用filter功能

[grid@jytest1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk03
DATA2                       ENABLED   /dev/asmdisk04
FRA1                        ENABLED   /dev/asmdisk07
TEST1                       ENABLED   /dev/asmdisk05
TEST2                       ENABLED   /dev/asmdisk06
[grid@jytest1 ~]$ asmcmd afd_filter -d /dev/asmdisk05
[grid@jytest1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk03
DATA2                       ENABLED   /dev/asmdisk04
FRA1                        ENABLED   /dev/asmdisk07
TEST1                      DISABLED   /dev/asmdisk05
TEST2                       ENABLED   /dev/asmdisk06

清除磁盘的前1024字节

[root@jytest1 ~]# dd if=/dev/zero of=/dev/asmdisk05 bs=1024 count=1
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.000318516 s, 3.2 MB/s

[grid@jytest1 ~]$ asmcmd umount TEST
[grid@jytest1 ~]$ asmcmd mount TEST
ORA-15032: not all alterations performed
ORA-15017: diskgroup "TEST" cannot be mounted
ORA-15040: diskgroup is incomplete (DBD ERROR: OCIStmtExecute)


[grid@jytest1 ~]$ kfed read AFD:TEST1
kfbh.endian:                          0 ; 0x000: 0x00
kfbh.hard:                            0 ; 0x001: 0x00
kfbh.type:                            0 ; 0x002: KFBTYP_INVALID
kfbh.datfmt:                          0 ; 0x003: 0x00
kfbh.block.blk:                       0 ; 0x004: blk=0
kfbh.block.obj:                       0 ; 0x008: file=0
kfbh.check:                           0 ; 0x00c: 0x00000000
kfbh.fcn.base:                        0 ; 0x010: 0x00000000
kfbh.fcn.wrap:                        0 ; 0x014: 0x00000000
kfbh.spare1:                          0 ; 0x018: 0x00000000
kfbh.spare2:                          0 ; 0x01c: 0x00000000
000000000 00000000 00000000 00000000 00000000  [................]
  Repeat 255 times
KFED-00322: invalid content encountered during block traversal: [kfbtTraverseBlock][Invalid OSM block type][][0]

可以看到当filter功能被禁用时就失去了保护功能

使用之前备份的磁盘前1024字节信息来恢复磁盘头

[root@jytest1 ~]# dd if=asmdisk05_header of=/dev/asmdisk05 bs=1024 count=1
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.000274822 s, 3.7 MB/s

[grid@jytest1 ~]$ kfed  read /dev/asmdisk05
kfbh.endian:                          1 ; 0x000: 0x01
kfbh.hard:                          130 ; 0x001: 0x82
kfbh.type:                            1 ; 0x002: KFBTYP_DISKHEAD
kfbh.datfmt:                          1 ; 0x003: 0x01
kfbh.block.blk:                       0 ; 0x004: blk=0
kfbh.block.obj:              2147483648 ; 0x008: disk=0
kfbh.check:                  1645917758 ; 0x00c: 0x621ab63e
kfbh.fcn.base:                        0 ; 0x010: 0x00000000
kfbh.fcn.wrap:                        0 ; 0x014: 0x00000000
kfbh.spare1:                          0 ; 0x018: 0x00000000
kfbh.spare2:                          0 ; 0x01c: 0x00000000
kfdhdb.driver.provstr:    ORCLDISKTEST1 ; 0x000: length=13
kfdhdb.driver.reserved[0]:   1414743380 ; 0x008: 0x54534554
kfdhdb.driver.reserved[1]:           49 ; 0x00c: 0x00000031
kfdhdb.driver.reserved[2]:            0 ; 0x010: 0x00000000
kfdhdb.driver.reserved[3]:            0 ; 0x014: 0x00000000
kfdhdb.driver.reserved[4]:            0 ; 0x018: 0x00000000
kfdhdb.driver.reserved[5]:            0 ; 0x01c: 0x00000000
kfdhdb.compat:                203424000 ; 0x020: 0x0c200100
kfdhdb.dsknum:                        0 ; 0x024: 0x0000
kfdhdb.grptyp:                        2 ; 0x026: KFDGTP_NORMAL
kfdhdb.hdrsts:                        3 ; 0x027: KFDHDR_MEMBER
kfdhdb.dskname:                   TEST1 ; 0x028: length=5
kfdhdb.grpname:                    TEST ; 0x048: length=4
kfdhdb.fgname:                    TEST1 ; 0x068: length=5

再次mount磁盘组TEST

[grid@jytest1 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Logical_Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  EXTERN  N         512             512   4096  4194304     40960      264                0             264              0             Y  CRS/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    24732                0           24732              0             N  DATA/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    18452                0           18452              0             N  FRA/
[grid@jytest1 ~]$ asmcmd mount TEST
[grid@jytest1 ~]$ asmcmd lsdg
State    Type    Rebal  Sector  Logical_Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
MOUNTED  EXTERN  N         512             512   4096  4194304     40960      264                0             264              0             Y  CRS/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    24732                0           24732              0             N  DATA/
MOUNTED  EXTERN  N         512             512   4096  4194304     40960    18452                0           18452              0             N  FRA/
MOUNTED  NORMAL  N         512             512   4096  4194304     40960    11120                0            5560              0             N  TEST/

设置,清除与扫描Oracle ASM Filter Driver Labels

给由Oracle ASMFD管理的磁盘设置一个标识,在标识设置后,指定的磁盘将会由Oracle ASMFD来管理。可以使用ASMCMD afd_label,afd_unlabel与afd_scan来增加,删除和扫描标识查看已经标识过的磁盘可以看到磁盘/dev/asmdisk03和 /dev/asmdisk05没有被标识。

[grid@cs1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk04

SQL> select group_number,disk_number,name,label,path from v$asm_disk;

GROUP_NUMBER DISK_NUMBER NAME                           LABEL                                              PATH
------------ ----------- ------------------------------ -------------------------------------------------- --------------------------------------------------
           0           0                                CRS1                                               AFD:CRS1
           0           1                                                                                   /dev/asmdisk05
           0           2                                DATA1                                              AFD:DATA1
           0           3                                                                                   /dev/asmdisk03
           0           4                                CRS2                                               AFD:CRS2
           1           0 CRS1                           CRS1                                               /dev/asmdisk02
           1           1 CRS2                           CRS2                                               /dev/asmdisk01
           2           0 DATA1                          DATA1                                              /dev/asmdisk04

设置标识

[grid@cs2 ~]$ asmcmd afd_label DN1 /dev/asmdisk03
[grid@cs2 ~]$ asmcmd afd_label DN2 /dev/asmdisk05

查看已经标识过的磁盘可以看到磁盘/dev/asmdisk03和 /dev/asmdisk05已经被标识

[grid@cs1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk04
DN1                         ENABLED   /dev/asmdisk03
DN2                         ENABLED   /dev/asmdisk05

SQL> select group_number,disk_number,name,label,path from v$asm_disk;

GROUP_NUMBER DISK_NUMBER NAME                           LABEL                                                          PATH
------------ ----------- ------------------------------ -------------------------------------------------------------- --------------------------------------------------
           0           0                                CRS1                                                           AFD:CRS1
           0           1                                DN2                                                            /dev/asmdisk05
           0           2                                DN1                                                            AFD:DN1
           0           3                                DATA1                                                          AFD:DATA1
           0           4                                DN1                                                            /dev/asmdisk03
           0           6                                CRS2                                                           AFD:CRS2
           0           5                                DN2                                                            AFD:DN2
           1           1 CRS2                           CRS2                                                           /dev/asmdisk01
           1           0 CRS1                           CRS1                                                           /dev/asmdisk02
           2           0 DATA1                          DATA1                                                          /dev/asmdisk04

清除标识

[grid@cs1 ~]$ asmcmd afd_unlabel 'DN1'
[grid@cs1 ~]$ asmcmd afd_unlabel 'DN2'

注意在清除标识时,如果标识所标记的磁盘已经用来创建磁盘组了那么是不能清除的,例如

[grid@cs1 ~]$ asmcmd afd_unlabel 'TEST1'
disk AFD:TEST1 is already provisioned for ASM
No devices to be unlabeled.
ASMCMD-9514: ASM disk label clear operation failed.

扫描标识

[grid@cs1 ~]$ asmcmd afd_scan

查看已经标识过的磁盘可以看到 /dev/asmdisk03和 /dev/asmdisk05的标识已经清除了

[grid@cs1 ~]$ asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label                     Filtering   Path
================================================================================
CRS1                        ENABLED   /dev/asmdisk02
CRS2                        ENABLED   /dev/asmdisk01
DATA1                       ENABLED   /dev/asmdisk04

SQL> select group_number,disk_number,name,label,path from v$asm_disk;

GROUP_NUMBER DISK_NUMBER NAME                           LABEL                                                          PATH
------------ ----------- ------------------------------ -------------------------------------------------------------- --------------------------------------------------
           0           0                                CRS1                                                           AFD:CRS1
           0           1                                                                                               /dev/asmdisk05
           0           2                                DATA1                                                          AFD:DATA1
           0           3                                                                                               /dev/asmdisk03
           0           4                                CRS2                                                           AFD:CRS2
           1           1 CRS2                           CRS2                                                           /dev/asmdisk01
           1           0 CRS1                           CRS1                                                           /dev/asmdisk02
           2           0 DATA1                          DATA1                                                          /dev/asmdisk04

以上所述就是小编给大家介绍的《12C Oracle ASM Filter Driver》,希望对大家有所帮助,如果大家有任何疑问请给我留言,小编会及时回复大家的。在此也非常感谢大家对 码农网 的支持!

查看所有标签

猜你喜欢:

本站部分资源来源于网络,本站转载出于传递更多信息之目的,版权归原作者或者来源机构所有,如转载稿涉及版权问题,请联系我们

深入理解程序设计

深入理解程序设计

[美] Jonathan Bartlett / 郭晴霞 / 人民邮电出版社 / 2014-1 / 49.00

是否真正理解汇编语言,常常是普通程序员和优秀程序员的分水岭。《深入理解程序设计:使用Linux汇编语言》介绍了Linux平台下的汇编语言编程,教你从计算机的角度看问题,从而了解汇编语言及计算机的工作方式,为成就自己的优秀程序员之梦夯实基础。 很多人都认为汇编语言晦涩难懂,但New Medio技术总监Jonathan Bartlett的这本书将改变人们的看法。本书首先介绍计算机的体系结构,然后......一起来看看 《深入理解程序设计》 这本书的介绍吧!

RGB转16进制工具
RGB转16进制工具

RGB HEX 互转工具

RGB CMYK 转换工具
RGB CMYK 转换工具

RGB CMYK 互转工具

HEX HSV 转换工具
HEX HSV 转换工具

HEX HSV 互换工具