K8S1.14高可用生产集群部署方案

栏目: 编程工具 · 发布时间: 5年前

内容简介:架构说明:安装好CentOS7的系统,做以下操作:

系统说明

系统组件版本

  • 操作系统: CentOS 7.6
  • Kernel: 4.4
  • Kubernetes: v1.14.1
  • Docker: 18.09 (支持 1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09 )
  • Etcd: v3.3.12
  • Flannel: v0.11
  • cni-plugins: v0.7.5
  • CoreDNS: 1.4.0

架构示意图

K8S1.14高可用生产集群部署方案

架构说明:

  1. 使用六台主机,三台Master节点, 三台node节点
  2. Master节点上部署的Kubernetes组件有kube-apiserver, kube-scheduler, kube-controller-manager,kube-proxy。部署网络组件flannel,数据存储集群Etcd.
  3. Master的两个高可用节点部署Haproxy和keepalived
  4. Node 节点部署的Kubernetes组件有Kubelet,kube-proxy。 容器组件Docker,网络组件Flannel
  5. 集群IP和主机名信息:
集群角色 主机名 IP
Master master-1 192.168.20.44
Master master-2 192.168.20.45
Master master-3 192.168.20.46
Node k8s-node-1 192.168.20.47
Node k8s-node-2 192.168.20.48
Node k8s-node-3 192.168.20.49
  1. Ceph 需要一个可用的Ceph集群

系统初始化

1. 主机初始化

安装好CentOS7的系统,做以下操作:

yum update

设置内核参数的部分,要确认执行如下操作:

# 高可用Master节点设置内核参数
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.ipv4.ip_nonlocal_bind = 1    
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_local_port_range = 10000 65000
fs.file-max = 2000000
net.ipv4.ip_forward = 1
vm.swappiness = 0
EOF

# 其他Master节点和计算节点设置内核参数
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_local_port_range = 10000 65000
fs.file-max = 2000000
net.ipv4.ip_forward = 1
vm.swappiness = 0
EOF

2. 安装Docker

由于在Kubernetes1.14的版本中,支持的版本有 1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09,所以这里统一使用 Docker 18.09。

下载 docker-ce-18.09 的rpm包和阿里云上对应的 docker-ce.repo 的源,在所有node节点上直接安装:

mv docker-ce.repo /etc/yum.repos.d/
yum install docker-ce-18.09.5-3.el7.x86_64.rpm -y

在所有node节点启动docker,并配置自启动:

systemctl start docker
systemctl enable docker

3. 创建目录

在所有主机上执行如下命令,创建所需目录:

mkdir -p /opt/kubernetes/{cfg,bin,ssl,log}

4. 准备Kubernetes软件包

从github下载kubernetes 1.14版本的二进制软件包,下载地址: https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.14.md#server-binaries

下载如下软件包:

[root@master-1 tmp]# ll
total 537520
-rw-r--r-- 1 root root 113938518 Jul 24 19:15 kubernetes-node-linux-amd64.tar.gz
-rw-r--r-- 1 root root 433740362 Jul 24 19:09 kubernetes-server-linux-amd64.tar.gz

解压:

tar xf kubernetes-server-linux-amd64.tar.gz

5.准备etcd和flannel组件

从github下载etcd v3.3.12和flannel v0.11.0 :

wget https://github.com/etcd-io/etcd/releases/download/v3.3.12/etcd-v3.3.12-linux-amd64.tar.gz
wget https://github.com/coreos/flannel/releases/download/v0.11.0/flannel-v0.11.0-linux-amd64.tar.gz

制作CA证书

Kubernetes支持使用多种方式生成证书,可以使用easyrsa, openssl 或 cfssl任一一种生成。

参考链接

这里使用cfssl创建CA证书。

1.安装CFSSL

使用cfssl生成CA证书需要单独安装cfssl。

[root@master-1 ~]# cd /usr/local/src/

curl -L https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -o /opt/kubernetes/bin/cfssl
curl -L https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -o /opt/kubernetes/bin/cfssljson
curl -L https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -o /opt/kubernetes/bin/cfssl-certinfo
chmod +x /opt/kubernetes/bin/*

所有节点添加Kubernetes的bin目录到系统环境变量:

echo 'PATH=$PATH:/opt/kubernetes/bin' >>/etc/profile
source /etc/profile

2.生成证书

  1. 创建需要的配置文件:
[root@master-1 ~]# cd /opt/kubernetes/ssl/
[root@master-1 ssl]# cfssl  print-defaults config > config.json
[root@master-1 ssl]# cfssl print-defaults csr > csr.json
[root@master-1 ssl]# ll
total 8
-rw-r--r-- 1 root root 567 Jul 26 00:05 config.json
-rw-r--r-- 1 root root 287 Jul 26 00:05 csr.json
[root@master-1 ssl]# mv config.json ca-config.json
[root@master-1 ssl]# mv csr.json  ca-csr.json
  1. 修改生成的文件为如下内容:

    ca-config.json文件:

[root@master-1 ssl]# vim ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}

ca-csr.json文件:

[root@master-1 ssl]# vim ca-csr.json 
{
    "CN": "kubernetes",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
          "C": "CN",
          "ST": "BeiJing",
          "L": "BeiJing",
          "O": "k8s",
          "OU": "System"
        }
    ]
}
  1. 生成证书(ca-key.pem)和秘钥(ca.pem):
[root@master-1 ssl]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca
2018/07/26 00:27:00 [INFO] generating a new CA key and certificate from CSR
2018/07/26 00:27:00 [INFO] generate received request
2018/07/26 00:27:00 [INFO] received CSR
2018/07/26 00:27:00 [INFO] generating key: rsa-2048
2018/07/26 00:27:01 [INFO] encoded CSR
2018/07/26 00:27:01 [INFO] signed certificate with serial number 479065525331838190845576195908271097044538206777
[root@master-1 ssl]# ll
total 20
-rw-r--r-- 1 root root  386 Jul 26 00:16 ca-config.json
-rw-r--r-- 1 root root 1001 Jul 26 00:27 ca.csr
-rw-r--r-- 1 root root  255 Jul 26 00:20 ca-csr.json
-rw------- 1 root root 1679 Jul 26 00:27 ca-key.pem
-rw-r--r-- 1 root root 1359 Jul 26 00:27 ca.pem
  1. 分发证书到各个节点:
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.45:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.46:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.47:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.48:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.49:/opt/kubernetes/ssl

HA 节点部署

这里选择两个Master节点部署Haproxy 和 keepalived, keepalived上需要添加监控haproxy应用的脚本。

keepalived 配置

  1. HA节点下载安装keepalive:
yum install keepalived -y
  1. 配置两个虚拟IP,一个用于k8s集群的apiserver代理,另一个用于nginx ingress入口(也可以单独配置),同时要设置对haproxy的状态判断,如果节点上的haproxy进程结束需要自动切换VIP到另一节点上, 主HA配置如下:
# cat /etc/keepalived/keepalived.conf 
! Configuration File for keepalived

vrrp_script check_haproxy {
        script "/etc/keepalived/check_haproxy.sh"
        interval 3
        weight -20
}

vrrp_instance K8S {
    state backup 
    interface eth0
    virtual_router_id 44
    priority 200
    advert_int 5
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.20.50
        192.168.20.60

    }
    track_script {
        check_haproxy
   }

}
  1. 从HA配置如下:
! Configuration File for keepalived

vrrp_script check_haproxy {
        script "/etc/keepalived/check_haproxy.sh"
        interval 3
        weight -20
}

vrrp_instance K8S {
    state backup
    interface eth0
    virtual_router_id 44
    priority 190
    advert_int 5
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.20.50
        192.168.20.60

    }
    track_script {
        check_haproxy
   }
}
  1. 在这两个节点上配置对应的监测脚本:
vim /etc/keepalived/check_haproxy.sh

#!/bin/bash
active_status=`netstat -lntp|grep haproxy|wc -l`
if [ $active_status -gt 0 ]; then
    exit 0
else
    exit 1
fi
  1. 需要添加权限
chmod +x /etc/keepalived/check_haproxy.sh

部署Haproxy

官方配置手册

  1. 需要先确认已经配置了内核参数:
echo 'net.ipv4.ip_nonlocal_bind = 1'>>/etc/sysctl.conf
echo 'net.ipv4.ip_forward = 1'>>/etc/sysctl.conf

sysctl -p
  1. 安装haproxy
yum install haproxy -y
  1. 配置haproxy, 我们为k8s集群设计的VIP为 192.168.20.50,使用4层代理的方式, 配置文件如下:
# cat /etc/haproxy/haproxy.cfg |egrep -v "^#"

global

    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

defaults
    mode                    tcp           # 修改默认为四层代理
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

frontend  main 192.168.20.50:6443
    acl url_static       path_beg       -i /static /images /javascript /stylesheets
    acl url_static       path_end       -i .jpg .gif .png .css .js

    default_backend             k8s-node

backend k8s-node
    mode        tcp             # 修改为tcp
    balance     roundrobin
    server  k8s-node-1  192.168.20.44:6443 check     # 三个master主机
    server  k8s-node-2  192.168.20.45:6443 check
    server  k8s-node-3  192.168.20.46:6443 check

配置完成之后检查IP是否可以自动切换。

部署ETCD集群

1.安装etcd

执行如下命令,完成etcd的安装:

[root@master-1 ~]# cd /tmp/
[root@master-1 tmp]# tar xf etcd-v3.3.12-linux-amd64.tar.gz 
[root@master-1 tmp]# cd etcd-v3.3.12-linux-amd64
[root@master-1 tmp]# cp etcd* /opt/kubernetes/bin/
[root@master-1 tmp]# scp etcd* 192.168.20.45:/opt/kubernetes/bin/
[root@master-1 tmp]# scp etcd* 192.168.20.46:/opt/kubernetes/bin/

2.生成etcd的专属证书

1.创建etcd证书签名请求

[root@master-1 ~]# vim etcd-csr.json
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
"192.168.20.44",
"192.168.20.45",
"192.168.20.46"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

2.生成etcd证书

[root@master-1 ~]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem  \
-ca-key=/opt/kubernetes/ssl/ca-key.pem  \
-config=/opt/kubernetes/ssl/ca-config.json  \
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd

会生成如下文件:

[root@master-1 ~]# ll
total 16
-rw-r--r-- 1 root root 1062 Jul 26 01:18 etcd.csr
-rw-r--r-- 1 root root  287 Jul 26 00:50 etcd-csr.json
-rw------- 1 root root 1679 Jul 26 01:18 etcd-key.pem
-rw-r--r-- 1 root root 1436 Jul 26 01:18 etcd.pem
  1. 移动证书到ssl目录:
[root@master-1 ~]#  cp etcd*.pem /opt/kubernetes/ssl
[root@master-1 ~]# scp etcd*.pem 192.168.20.45:/opt/kubernetes/ssl
[root@master-1 ~]# scp etcd*.pem 192.168.20.46:/opt/kubernetes/ssl

3.配置etcd

  1. 配置ETCD配置文件

master-1上的配置为:

[root@master-1 ~]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME="etcd-node-1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_SNAPSHOT_COUNTER="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
ETCD_LISTEN_PEER_URLS="https://192.168.20.44:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.20.44:2379,https://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.20.44:2380"
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
ETCD_INITIAL_CLUSTER="etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.20.44:2379"
#[security]
CLIENT_CERT_AUTH="true"
ETCD_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"
PEER_CLIENT_CERT_AUTH="true"
ETCD_PEER_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_PEER_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_PEER_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"

master-2上的配置为:

[root@master-2 tmp]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME="etcd-node-2"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_SNAPSHOT_COUNTER="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
ETCD_LISTEN_PEER_URLS="https://192.168.20.45:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.20.45:2379,https://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.20.45:2380"
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
ETCD_INITIAL_CLUSTER="etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.20.45:2379"
#[security]
CLIENT_CERT_AUTH="true"
ETCD_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"
PEER_CLIENT_CERT_AUTH="true"
ETCD_PEER_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_PEER_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_PEER_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"

master-3上的配置为:

[root@master-3 ~]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME="etcd-node-3"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_SNAPSHOT_COUNTER="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
ETCD_LISTEN_PEER_URLS="https://192.168.20.46:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.20.46:2379,https://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.20.46:2380"
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
ETCD_INITIAL_CLUSTER="etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.20.46:2379"
#[security]
CLIENT_CERT_AUTH="true"
ETCD_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"
PEER_CLIENT_CERT_AUTH="true"
ETCD_PEER_CA_FILE="/opt/kubernetes/ssl/ca.pem"
ETCD_PEER_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
ETCD_PEER_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"

在三个节点上创建etcd的systemd文件:

[root@master-1 ~]# vim /usr/lib/systemd/system/etcd.service
[Unit]
Description=etcd
Documentation=https://github.com/coreos/etcd
Conflicts=etcd.service
Conflicts=etcd2.service

[Service]
Type=notify
Restart=always
RestartSec=5s
LimitNOFILE=40000
TimeoutStartSec=0
WorkingDirectory=/var/lib/etcd
EnvironmentFile=-/opt/kubernetes/cfg/etcd.conf
# set GOMAXPROCS to number of processors
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /opt/kubernetes/bin/etcd"

[Install]
WantedBy=multi-user.target
  1. 启动ETCD服务,在三个节点执行如下命令:
mkdir /var/lib/etcd
systemctl daemon-reload
systemctl start etcd
systemctl enable etcd

确认所以节点的etcd服务启动。

4.验证集群

[root@master-1 ~]# etcdctl --endpoints=https://192.168.20.44:2379 \
 --ca-file=/opt/kubernetes/ssl/ca.pem \
 --cert-file=/opt/kubernetes/ssl/etcd.pem \
 --key-file=/opt/kubernetes/ssl/etcd-key.pem cluster-health
member 32922a109cfe00b2 is healthy: got healthy result from https://192.168.20.46:2379
member 4fa519fdd3e64a84 is healthy: got healthy result from https://192.168.20.45:2379
member cab6e832332e8b2a is healthy: got healthy result from https://192.168.20.44:2379
cluster is healthy

Master节点部署

1.部署Kubernetes软件包

[root@master-1 ~]# cd /tmp/kubernetes/server/bin/
[root@master-1 bin]# cp kube-apiserver /opt/kubernetes/bin/
[root@master-1 bin]# cp kube-controller-manager /opt/kubernetes/bin/
[root@master-1 bin]# cp kube-scheduler /opt/kubernetes/bin/

2.生成API Server的认证文件

参考链接

1.创建用于生成CSR的JSON文件,这里需要指定 HA代理的IP ,和集群的ClusterIP:

[root@master-1 ~]# cd /opt/kubernetes/ssl
[root@master-1 ssl]# vim kubernetes-csr.json
{
  "CN": "kubernetes",
  "hosts": [
    "127.0.0.1",
    "192.168.20.50",
    "10.1.0.1",
    "kubernetes",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

2.生成Kubernetes的证书和私钥

[root@master-1 ssl]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \
   -ca-key=/opt/kubernetes/ssl/ca-key.pem \
   -config=/opt/kubernetes/ssl/ca-config.json \
   -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes
  1. 将私钥分发到其它所有的node节点中:
[root@master-1 ssl]# scp kubernetes*.pem 192.168.20.46:/opt/kubernetes/ssl/
...
  1. 创建 API Server使用的token文件
[root@master-1 ~]# head -c 16 /dev/urandom | od -An -t x | tr -d ' '
197f33fcbbfab2d15603dcc4408358f5
[root@master-1 ~]# vim /opt/kubernetes/ssl/bootstrap-token.csv
197f33fcbbfab2d15603dcc4408358f5,kubelet-bootstrap,10001,"system:kubelet-bootstrap"
  1. 创建基础用户名,密码认证配置
[root@k8s-node-1 ~]#  vim /opt/kubernetes/ssl/basic-auth.csv
admin,admin,1
readonly,readonly,2
  1. 将ssl目录的文件拷贝到其它的master节点上
scp -r -p /opt/kubernetes/ssl/*  k8s-node-1:/opt/kubernetes/ssl/
scp -r -p /opt/kubernetes/ssl/*  k8s-node-2:/opt/kubernetes/ssl/
scp -r -p /opt/kubernetes/ssl/*  k8s-node-3:/opt/kubernetes/ssl/

3.部署kube-apiserver

  1. 创建kube-apiserver的systemd文件
[root@k8s-node-1 ~]#  vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
ExecStart=/opt/kubernetes/bin/kube-apiserver \
  --enable-admission-plugins=MutatingAdmissionWebhook,ValidatingAdmissionWebhook,NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota,NodeRestriction \
  --bind-address=192.168.20.44 \
  --insecure-bind-address=127.0.0.1 \
  --authorization-mode=Node,RBAC \
  --runtime-config=rbac.authorization.k8s.io/v1 \
  --kubelet-https=true \
  --anonymous-auth=false \
  --basic-auth-file=/opt/kubernetes/ssl/basic-auth.csv \
  --enable-bootstrap-token-auth \
  --token-auth-file=/opt/kubernetes/ssl/bootstrap-token.csv \
  --service-cluster-ip-range=10.1.0.0/16 \
  --service-node-port-range=20000-40000 \
  --tls-cert-file=/opt/kubernetes/ssl/kubernetes.pem \
  --tls-private-key-file=/opt/kubernetes/ssl/kubernetes-key.pem \
  --client-ca-file=/opt/kubernetes/ssl/ca.pem \
  --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \
  --etcd-cafile=/opt/kubernetes/ssl/ca.pem \
  --etcd-certfile=/opt/kubernetes/ssl/kubernetes.pem \
  --etcd-keyfile=/opt/kubernetes/ssl/kubernetes-key.pem \
  --etcd-servers=https://192.168.20.44:2379,https://192.168.20.45:2379,https://192.168.20.46:2379 \
  --enable-swagger-ui=true \
  --allow-privileged=true \
  --audit-log-maxage=30 \
  --audit-log-maxbackup=3 \
  --audit-log-maxsize=100 \
  --audit-log-path=/opt/kubernetes/log/api-audit.log \
  --event-ttl=1h \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
  1. 启动kube-apiserver服务
[root@k8s-node-1 ~]# systemctl daemon-reload
[root@k8s-node-1 ~]# systemctl start kube-apiserver
[root@k8s-node-1 ~]# systemctl enable kube-apiserver
  1. 查看服务状态是否正常
[root@master-1 ~]# systemctl status kube-apiserver
[root@master-1 ~]# netstat -lntp|grep kube-apiserver
tcp        0      0 192.168.20.44:6443      0.0.0.0:*               LISTEN      4289/kube-apiserver 
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      4289/kube-apiserver

4.部署controller-manager

  1. 生成controller-manager的systemd文件
[root@master-1 ~]# vim /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
ExecStart=/opt/kubernetes/bin/kube-controller-manager \
  --bind-address=127.0.0.1 \
  --master=http://127.0.0.1:8080 \
  --allocate-node-cidrs=true \
  --service-cluster-ip-range=10.1.0.0/16 \
  --cluster-cidr=10.2.0.0/16 \
  --cluster-name=kubernetes \
  --cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \
  --cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem \
  --service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \
  --root-ca-file=/opt/kubernetes/ssl/ca.pem \
  --leader-elect=true \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
  1. 启动kube-controller-manager
[root@master-1 ~]# systemctl daemon-reload
[root@master-1 ~]# systemctl start kube-controller-manager
[root@master-1 ~]# systemctl enable kube-controller-manager
  1. 查看服务状态
[root@master-1 ~]# systemctl status kube-controller-manager
[root@master-1 ~]# netstat -lntp|grep kube-con
tcp        0      0 127.0.0.1:10252         0.0.0.0:*               LISTEN      4390/kube-controlle

5.部署Kubernetes Scheduler

  1. 创建systemd文件:
[root@master-1 ~]# vim /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
ExecStart=/opt/kubernetes/bin/kube-scheduler \
  --address=127.0.0.1 \
  --master=http://127.0.0.1:8080 \
  --leader-elect=true \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
  1. 启动服务
[root@master-1 ~]# systemctl daemon-reload
[root@master-1 ~]# systemctl start kube-scheduler
[root@master-1 ~]# systemctl enable kube-scheduler
  1. 查看服务状态
[root@master-1 ~]# systemctl status kube-scheduler
[root@master-1 ~]# netstat -lntp|grep kube-scheduler
tcp        0      0 127.0.0.1:10251         0.0.0.0:*               LISTEN      4445/kube-scheduler

6. Master节点部署kube-proxy(可选)

(参见node节点部署部分,需要创建对应的kube-proxy家目录)

7. 使用上述方式,配置master-1和master-2

  1. 将master-1上的ssl,cfg,bin 文件拷贝到其它master节点的对应位置。
  2. 配置各个服务的启动文件,并启动。

8.部署kubectl命令行工具

  1. 安装二进制包
[root@master-1 ~]# cd /tmp/kubernetes/node/bin/
[root@master-1 bin]# cp kubectl /opt/kubernetes/bin/

2.创建admin证书签名

[root@master-1 ~]# vim /opt/kubernetes/ssl/admin-csr.json
{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "system:masters",
      "OU": "System"
    }
  ]
}

3.生成admin证书和私钥

[root@master-1 ~]# cd /opt/kubernetes/ssl/
[root@master-1 ssl]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \
   -ca-key=/opt/kubernetes/ssl/ca-key.pem \
   -config=/opt/kubernetes/ssl/ca-config.json \
   -profile=kubernetes admin-csr.json | cfssljson -bare admin
  1. 设置集群参数
[root@master-1 ~]#  kubectl config set-cluster kubernetes \
    --certificate-authority=/opt/kubernetes/ssl/ca.pem \
    --embed-certs=true \
    --server=https://192.168.20.50:6443
Cluster "kubernetes" set.

5.设置客户端认证参数:

[root@naster-1 ~]# kubectl config set-credentials admin \
    --client-certificate=/opt/kubernetes/ssl/admin.pem \
    --embed-certs=true \
    --client-key=/opt/kubernetes/ssl/admin-key.pem
User "admin" set.

6.设置上下文参数

[root@master-1 ~]# kubectl config set-context kubernetes \
    --cluster=kubernetes \
    --user=admin
Context "kubernetes" created.

7.设置默认上下文:

[root@master-1 ~]# kubectl config use-context kubernetes
Switched to context "kubernetes".

8.使用Kubectl工具查看当前状态:

[root@master-1 ~]# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
etcd-2               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}

Node节点部署

1.安装所需的服务

将kubernetes-node-linux-amd64.tar.gz压缩包在node节点解压,执行如下操作

[root@k8s-node-1 ~]# cd /tmp/kubernetes/node/bin
[root@k8s-node-1 bin]# cp kubelet kube-proxy  /opt/kubernetes/bin/
[root@k8s-node-1 bin]# scp kubelet kube-proxy  192.168.20.48:/opt/kubernetes/bin/
[root@k8s-node-1 bin]# scp kubelet kube-proxy  192.168.20.49:/opt/kubernetes/bin/

2.配置角色和认证参数

  1. 在master-1上创建角色绑定
[root@master-1 ~]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
clusterrolebinding.rbac.authorization.k8s.io "kubelet-bootstrap" created
  1. 创建kubelet bootstrapping kubeconfig文件,设置集群参数
[root@master-1 ~]# kubectl config set-cluster kubernetes \
   --certificate-authority=/opt/kubernetes/ssl/ca.pem \
   --embed-certs=true \
   --server=https://192.168.20.50:6443 \
   --kubeconfig=bootstrap.kubeconfig
Cluster "kubernetes" set.

3.设置客户端认证参数

[root@master-1 ~]# kubectl config set-credentials kubelet-bootstrap \
   --token=197f33fcbbfab2d15603dcc4408358f5 \
   --kubeconfig=bootstrap.kubeconfig   

User "kubelet-bootstrap" set.

4.设置上下文认证参数

[root@master-1 ~]# kubectl config set-context default \
    --cluster=kubernetes \
    --user=kubelet-bootstrap \
    --kubeconfig=bootstrap.kubeconfig
Context "default" created.

5.选择默认上下文

[root@master-1 ~]# kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
Switched to context "default"

6.执行上面的操作后,会在当前目录生成一个bootstrap.kubeconfig的config文件,将此文件分发到各节点:

[root@k8s-node-1 ~]# cp bootstrap.kubeconfig /opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.47:/opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.48:/opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.49:/opt/kubernetes/cfg/
  1. 将master上更新的配置拷贝到其它master节点。

3.设置支持CNI

以下操作需要在所有node节点执行

  1. 设置Kubernetes对CNI的支持:
[root@k8s-node-2 ~]# mkdir -p /etc/cni/net.d
[root@k8s-node-2 ~]# vim /etc/cni/net.d/10-default.conf
{
        "name": "flannel",
        "type": "flannel",
        "delegate": {
            "bridge": "docker0",
            "isDefaultGateway": true,
            "mtu": 1400
        }
}

4.配置Kubelet服务

以下操作需要在所有node节点执行

  1. 创建kubelet服务配置文件
[root@k8s-node-2 ~]# mkdir /var/lib/kubelet
[root@k8s-node-2 ~]# vim /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/opt/kubernetes/bin/kubelet \
  --address=192.168.20.48 \
  --hostname-override=192.168.20.48 \
  --pod-infra-container-image=mirrorgooglecontainers/pause-amd64:3.1 \
  --experimental-bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \
  --kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \
  --cert-dir=/opt/kubernetes/ssl \
  --network-plugin=cni \
  --cni-conf-dir=/etc/cni/net.d \
  --cni-bin-dir=/opt/kubernetes/bin/cni \
  --cluster-dns=10.1.0.2 \
  --cluster-domain=cluster.local. \
  --hairpin-mode hairpin-veth \
  --allow-privileged=true \
  --fail-swap-on=false \
  --logtostderr=true \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
  1. 启动Kubelet
[root@k8s-node-2 ~]# systemctl daemon-reload
[root@k8s-node-2 ~]# systemctl start kubelet
[root@k8s-node-2 ~]# systemctl enable kubelet
[root@k8s-node-2 ~]# systemctl status kubelet
  1. 在master节点上查看是否收到node节点的csr请求:
[root@master-1 ~]# kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk   2m        kubelet-bootstrap   Pending
  1. 批准kubelet的TLS请求
[root@master-1 ~]# kubectl get csr|grep 'Pending' | awk 'NR>0{print $1}'| xargs kubectl certificate approve
certificatesigningrequest.certificates.k8s.io "node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk" approved

[root@kmaster-1 ~]# kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk   11m       kubelet-bootstrap   Approved,Issued
  1. 之后查看node节点状态:
[root@master-1 ~]# kubectl get node
NAME            STATUS    ROLES     AGE       VERSION
192.168.20.48   Ready     <none>    35s       v1.14.1

node节点上查看kubelet 服务

[root@k8s-node-2 ~]# netstat -lntp|grep kubelet
tcp        0      0 127.0.0.1:10248         0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:10250     0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:10255     0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:4194      0.0.0.0:*               LISTEN      7917/kubelet

5.部署kube-proxy

1.配置kube-proxy使用LVS,所有节点执行:

yum install -y ipvsadm ipset conntrack

2.创建证书请求

[root@master-1 ~]# vim kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

3.生成证书

[root@master-1 ~]#  cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \
    -ca-key=/opt/kubernetes/ssl/ca-key.pem \
    -config=/opt/kubernetes/ssl/ca-config.json \
    -profile=kubernetes  kube-proxy-csr.json | cfssljson -bare kube-proxy

4.分发证书到所有node节点

[root@master-1 ~]# cp kube-proxy*.pem /opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.47:/opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.48:/opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.49:/opt/kubernetes/ssl/

5.创建kube-proxy配置文件

[root@k8s-node-2 ~]# kubectl config set-cluster kubernetes  \
  --certificate-authority=/opt/kubernetes/ssl/ca.pem   \
  --embed-certs=true   \
  --server=https://192.168.20.50:6443 \
  --kubeconfig=kube-proxy.kubeconfig
Cluster "kubernetes" set.

6.创建kube-proxy用户:

[root@k8s-node-2 ~]# kubectl config set-credentials kube-proxy \
    --client-certificate=/opt/kubernetes/ssl/kube-proxy.pem \
    --client-key=/opt/kubernetes/ssl/kube-proxy-key.pem \
    --embed-certs=true \
    --kubeconfig=kube-proxy.kubeconfig
User "kube-proxy" set.

7.设置默认上下文:

[root@k8s-node-2 ~]# kubectl config set-context default \
    --cluster=kubernetes \
    --user=kube-proxy \
    --kubeconfig=kube-proxy.kubeconfig
Context "default" created.

8.切换上下文为default:

[root@k8s-node-2 ~]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
Switched to context "default".

9.分发kube-proxy.kubeconfig配置文件到所有

[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.44:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.45:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.46:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.47:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.48:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.459/opt/kubernetes/cfg/

10.创建kube-proxy服务配置文件

所有节点执行,注意配置文件中IP需要修改为本机对应的IP

[root@k8s-node-1 ~]# mkdir /var/lib/kube-proxy
[root@k8s-node-1 ~]# vim /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/opt/kubernetes/bin/kube-proxy \
  --bind-address=192.168.20.47 \
  --hostname-override=192.168.20.47 \
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig \
  --masquerade-all \
  --feature-gates=SupportIPVSProxyMode=true \
  --proxy-mode=ipvs \
  --ipvs-min-sync-period=5s \
  --ipvs-sync-period=5s \
  --ipvs-scheduler=rr \
  --logtostderr=true \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

11.启动服务

systemctl start kube-proxy
systemctl enable kube-proxy
systemctl status kube-proxy

12.查看服务状态,lvs状态

[root@k8s-node-1 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.1.0.1:443 rr
  -> 192.168.20.44:6443           Masq    1      0          0         
  -> 192.168.20.45:6443           Masq    1      0          0         
  -> 192.168.20.46:6443           Masq    1      1          0

所有node节点配置成功后可以看到如下结果:

[root@master-1 ~]# kubectl get node
NAME            STATUS   ROLES    AGE     VERSION
192.168.20.47   Ready    <none>   6d21h   v1.14.1
192.168.20.48   Ready    <none>   4d1h    v1.14.1
192.168.20.49   Ready    <none>   4d1h    v1.14.1

Flannel 网络部署

所有节点都需要部署flannel。

1.创建Flannel证书

1.生成证书文件

[root@master-1 ~]# vim flanneld-csr.json
{
  "CN": "flanneld",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

2.生成证书

[root@master-1 ~]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \
    -ca-key=/opt/kubernetes/ssl/ca-key.pem \
    -config=/opt/kubernetes/ssl/ca-config.json \
    -profile=kubernetes flanneld-csr.json | cfssljson -bare flanneld

3.分发证书

[root@master-1 ~]# cp flanneld*.pem /opt/kubernetes/ssl/
[root@master-1 ~]# scp flanneld*.pem {all-k8s-node}:/opt/kubernetes/ssl/

2.部署flannel

1.将之前下载的flannel压缩包解压,并分发到其它节点如下操作:

cp mk-docker-opts.sh flanneld /opt/kubernetes/bin/
scp mk-docker-opts.sh flanneld {all-k8s-node}:/opt/kubernetes/bin/

2.创建如下文件,分发到各个node节点:

[root@k8s-node-1 tmp]# vim remove-docker0.sh
#!/bin/bash
# Delete default docker bridge, so that docker can start with flannel network.

# exit on any error
set -e

rc=0
ip link show docker0 >/dev/null 2>&1 || rc="$?"
if [[ "$rc" -eq "0" ]]; then
  ip link set dev docker0 down
  ip link delete docker0
fi
[root@k8s-node-1 tmp]# cp remove-docker0.sh /opt/kubernetes/bin/
[root@k8s-node-1 tmp]# scp remove-docker0.sh 192.168.20.48:/opt/kubernetes/bin/
[root@k8s-node-1 tmp]# scp remove-docker0.sh 192.168.20.49:/opt/kubernetes/bin/

3.配置flannel

[root@k8s-node-1 ~]# vim /opt/kubernetes/cfg/flannel
FLANNEL_ETCD="-etcd-endpoints=https://192.168.20.31:2379,https://192.168.20.32:2379,https://192.168.20.33:2379"
FLANNEL_ETCD_KEY="-etcd-prefix=/kubernetes/network"
FLANNEL_ETCD_CAFILE="--etcd-cafile=/opt/kubernetes/ssl/ca.pem"
FLANNEL_ETCD_CERTFILE="--etcd-certfile=/opt/kubernetes/ssl/flanneld.pem"
FLANNEL_ETCD_KEYFILE="--etcd-keyfile=/opt/kubernetes/ssl/flanneld-key.pem"
  1. 创建flannel服务文件
[root@k8s-node-1 ~]# vim /usr/lib/systemd/system/flannel.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
Before=docker.service

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/flannel
ExecStartPre=/opt/kubernetes/bin/remove-docker0.sh
ExecStart=/opt/kubernetes/bin/flanneld ${FLANNEL_ETCD} ${FLANNEL_ETCD_KEY} ${FLANNEL_ETCD_CAFILE} ${FLANNEL_ETCD_CERTFILE} ${FLANNEL_ETCD_KEYFILE}
ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -d /run/flannel/docker

Type=notify

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

5.分发创建的配置文件到各个节点:

scp /opt/kubernetes/cfg/flannel {all-k8s-node}:/opt/kubernetes/cfg/
scp /usr/lib/systemd/system/flannel.service {all-k8s-node}:/usr/lib/systemd/system/

3. Flannel CNI集成

1.下载CNI插件

wget https://github.com/containernetworking/plugins/releases/download/v0.7.5/cni-plugins-amd64-v0.7.5.tgz
[root@k8s-node-1 tmp]# mkdir /opt/kubernetes/bin/cni
[root@k8s-node-1 tmp]# tar xf cni-plugins-amd64-v0.7.5.tgz -C /opt/kubernetes/bin/cni

2.分发软件到各个节点:

[root@k8s-node-1 ~]# scp -r /opt/kubernetes/bin/cni/* {all-k8s-node}:/opt/kubernetes/bin/cni/

3.在etcd中创建key

[root@master-1 ~]# /opt/kubernetes/bin/etcdctl --ca-file /opt/kubernetes/ssl/ca.pem --cert-file /opt/kubernetes/ssl/flanneld.pem --key-file /opt/kubernetes/ssl/flanneld-key.pem \
     --no-sync -C https://192.168.20.44:2379,https://192.168.20.45:2379,https://192.168.20.46:2379 \
     mk /kubernetes/network/config '{ "Network": "10.2.0.0/16", "Backend": { "Type": "vxlan", "VNI": 1 }}' >/dev/null 2>&1

4.各个节点启动flannel

[root@k8s-node-1 ~]# chmod +x /opt/kubernetes/bin/*
[root@k8s-node-1 ~]# systemctl daemon-reload
[root@k8s-node-1 ~]# systemctl start flannel 
[root@k8s-node-1 ~]# systemctl enable flannel

配置Docker使用Flannel

1.修改docker的systemd的文件:

[Unit] #在Unit下面修改After和增加Requires
After=network-online.target firewalld.service flannel.service
Wants=network-online.target
Requires=flannel.service

[Service] #增加EnvironmentFile=-/run/flannel/docker
Type=notify
EnvironmentFile=-/run/flannel/docker
ExecStart=/usr/bin/dockerd $DOCKER_OPTS

2.其它NODE节点也做相同的修改

[root@k8s-node-2 ~]# scp /usr/lib/systemd/system/docker.service {k8s-node}:/usr/lib/systemd/system/

3.重启docker, 出现docker0网卡,且在10.2.0.0/16网段,说明配置成功

[root@k8s-node-3 ~]# systemctl daemon-reload
[root@k8s-node-3 ~]# systemctl restart docker
[root@k8s-node-3 ~]# ip a| grep -A 3 'docker0'
7: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN 
    link/ether 02:42:e9:2b:36:86 brd ff:ff:ff:ff:ff:ff
    inet 10.2.79.1/24 scope global docker0
       valid_lft forever preferred_lft forever

插件部署

1.创建CoreDNS

  1. 创建coredns.yaml,内容如下:
apiVersion: v1
kind: ServiceAccount
metadata:
  name: coredns
  namespace: kube-system
  labels:
      kubernetes.io/cluster-service: "true"
      addonmanager.kubernetes.io/mode: Reconcile
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
    addonmanager.kubernetes.io/mode: Reconcile
  name: system:coredns
rules:
- apiGroups:
  - ""
  resources:
  - endpoints
  - services
  - pods
  - namespaces
  verbs:
  - list
  - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
    addonmanager.kubernetes.io/mode: EnsureExists
  name: system:coredns
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:coredns
subjects:
- kind: ServiceAccount
  name: coredns
  namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
  labels:
      addonmanager.kubernetes.io/mode: EnsureExists
data:
  Corefile: |
    .:53 {
        errors
        health
        kubernetes cluster.local. in-addr.arpa ip6.arpa {
            pods insecure
            upstream
            fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        proxy . /etc/resolv.conf
        cache 30
    }
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: coredns
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile
    kubernetes.io/name: "CoreDNS"
spec:
  replicas: 2
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  selector:
    matchLabels:
      k8s-app: coredns
  template:
    metadata:
      labels:
        k8s-app: coredns
    spec:
      serviceAccountName: coredns
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
        - key: "CriticalAddonsOnly"
          operator: "Exists"
      containers:
      - name: coredns
        image: coredns/coredns:1.4.0
        imagePullPolicy: IfNotPresent
        resources:
          limits:
            memory: 170Mi
          requests:
            cpu: 100m
            memory: 70Mi
        args: [ "-conf", "/etc/coredns/Corefile" ]
        volumeMounts:
        - name: config-volume
          mountPath: /etc/coredns
        ports:
        - containerPort: 53
          name: dns
          protocol: UDP
        - containerPort: 53
          name: dns-tcp
          protocol: TCP
        livenessProbe:
          httpGet:
            path: /health
            port: 8080
            scheme: HTTP
          initialDelaySeconds: 60
          timeoutSeconds: 5
          successThreshold: 1
          failureThreshold: 5
      dnsPolicy: Default
      volumes:
        - name: config-volume
          configMap:
            name: coredns
            items:
            - key: Corefile
              path: Corefile
---
apiVersion: v1
kind: Service
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: coredns
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile
    kubernetes.io/name: "CoreDNS"
spec:
  selector:
    k8s-app: coredns
  clusterIP: 10.1.0.2
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP
  1. 执行此文件:
[root@master-1 tmp]# kubectl create -f coredns.yaml
  1. 确认DNS服务运行:
[root@master-1 ~]# kubectl get pod  -n kube-system  -o wide
NAME                                    READY   STATUS    RESTARTS   AGE    IP          NODE            NOMINATED NODE   READINESS GATES
coredns-76fcfc9f65-9fkfh                1/1     Running   2          3d7h   10.2.45.3   192.168.20.49   <none>           <none>
coredns-76fcfc9f65-zfplt                1/1     Running   1          3d6h   10.2.24.2   192.168.20.48   <none>           <none>

2. 部署Dashboard

1.执行目录中的yaml,部署Dashboard:

[root@master-1 ~]# ll /tmp/dashboard/
total 20
-rw-r--r-- 1 root root  356 Jul 27 03:43 admin-user-sa-rbac.yaml
-rw-r--r-- 1 root root 4253 Jul 27 03:47 kubernetes-dashboard.yaml
-rw-r--r-- 1 root root  458 Jul 27 03:49 ui-admin-rbac.yaml
-rw-r--r-- 1 root root  477 Jul 27 03:50 ui-read-rbac.yaml

[root@master-1 ~]# kubectl create -f /tmp/dashboard/

2.确认服务是否正常运行:

[root@master-1 ~]# kubectl get pod -n kube-system
NAME                                    READY   STATUS    RESTARTS   AGE
coredns-76fcfc9f65-9fkfh                1/1     Running   2          3d7h
coredns-76fcfc9f65-zfplt                1/1     Running   1          3d6h
kubernetes-dashboard-68ddcc97fc-w4bxf   1/1     Running   1          3d2h

[root@master-1 ~]# kubectl cluster-info
Kubernetes master is running at https://192.168.20.50:6443
CoreDNS is running at https://192.168.20.50:6443/api/v1/namespaces/kube-system/services/coredns:dns/proxy
kubernetes-dashboard is running at https://192.168.20.50:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy

To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.

3.根据提示信息,使用dashboard的url,登录,账号admin/admin, 使用如下命令生成token:

[root@master-1 ~]# kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')

4.复制token,选择使用令牌的方式登录:

K8S1.14高可用生产集群部署方案

3. Heapster 部署 (可选)

1.使用如下文件部署Heastper:

[root@master-1 ~]# ll heastper/
total 12
-rw-r--r-- 1 root root 2306 Jul 26 20:28 grafana.yaml
-rw-r--r-- 1 root root 1562 Jul 26 20:29 heapster.yaml
-rw-r--r-- 1 root root 1161 Jul 26 20:29 influxdb.yaml

[root@k8s-node-1 ~]# kubectl create -f heastper/
  1. 登录dashboard,查看石头出现资源利用率的图表。

K8S1.14高可用生产集群部署方案

  1. 使用 kubectl cluster-info 命令,查看当前服务的url地址。

补充说明

etcd无证书配置说明

在实际的生产环境中,如果都是使用的内网环境,可以将etd集群配置为无证书的模式,这样在配置和后续的故障恢复中会更简单。

etcd无证书配置需要使用http访问,安装上述文档,需要修改如下配置:

  1. etcd的配置文件注释掉安全证书部分,并将所有url改为http方式:
# cat /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME="etcd-node-1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_SNAPSHOT_COUNTER="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
ETCD_LISTEN_PEER_URLS="http://192.168.20.31:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.20.31:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.20.31:2380"
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
ETCD_INITIAL_CLUSTER="etcd-node-1=http://192.168.20.31:2380,etcd-node-2=http://192.168.20.32:2380,etcd-node-3=http://192.168.20.33:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.20.31:2379"
#[security]
#CLIENT_CERT_AUTH="true"
#ETCD_CA_FILE="/opt/kubernetes/ssl/ca.pem"
#ETCD_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
#ETCD_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"
#PEER_CLIENT_CERT_AUTH="true"
#ETCD_PEER_CA_FILE="/opt/kubernetes/ssl/ca.pem"
#ETCD_PEER_CERT_FILE="/opt/kubernetes/ssl/etcd.pem"
#ETCD_PEER_KEY_FILE="/opt/kubernetes/ssl/etcd-key.pem"
  1. fannel网络部分注释掉etcd的证书配置参数,并将URL该位http:
# cat /opt/kubernetes/cfg/flannel 

FLANNEL_ETCD="-etcd-endpoints=http://192.168.20.31:2379,http://192.168.20.32:2379,http://192.168.20.33:2379"
FLANNEL_ETCD_KEY="-etcd-prefix=/kubernetes/network"
#FLANNEL_ETCD_CAFILE="--etcd-cafile=/opt/kubernetes/ssl/ca.pem"
#FLANNEL_ETCD_CERTFILE="--etcd-certfile=/opt/kubernetes/ssl/flanneld.pem"
#FLANNEL_ETCD_KEYFILE="--etcd-keyfile=/opt/kubernetes/ssl/flanneld-key.pem"

3.kube-apiserver中去掉etcd的证书配置,这个文件中需要把参数直接删除,并将url改为http:

# cat /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
ExecStart=/opt/kubernetes/bin/kube-apiserver \
  --admission-control=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota,NodeRestriction \
  --bind-address=192.168.20.31 \
  --insecure-bind-address=127.0.0.1 \
  --authorization-mode=Node,RBAC \
  --runtime-config=rbac.authorization.k8s.io/v1 \
  --kubelet-https=true \
  --anonymous-auth=false \
  --basic-auth-file=/opt/kubernetes/ssl/basic-auth.csv \
  --enable-bootstrap-token-auth \
  --token-auth-file=/opt/kubernetes/ssl/bootstrap-token.csv \
  --service-cluster-ip-range=10.1.0.0/16 \
  --service-node-port-range=20000-40000 \
  --tls-cert-file=/opt/kubernetes/ssl/kubernetes.pem \
  --tls-private-key-file=/opt/kubernetes/ssl/kubernetes-key.pem \
  --client-ca-file=/opt/kubernetes/ssl/ca.pem \
  --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \
  --etcd-servers=http://192.168.20.31:2379,http://192.168.20.32:2379,http://192.168.20.33:2379 \
  --enable-swagger-ui=true \
  --allow-privileged=true \
  --audit-log-maxage=30 \
  --audit-log-maxbackup=3 \
  --audit-log-maxsize=100 \
  --audit-log-path=/opt/kubernetes/log/api-audit.log \
  --event-ttl=1h \
  --v=2 \
  --logtostderr=false \
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

4.分别重启flannel、kubelet、kube-apiserver等服务。


以上就是本文的全部内容,希望本文的内容对大家的学习或者工作能带来一定的帮助,也希望大家多多支持 码农网

查看所有标签

猜你喜欢:

本站部分资源来源于网络,本站转载出于传递更多信息之目的,版权归原作者或者来源机构所有,如转载稿涉及版权问题,请联系我们

电脑报(上下册)

电脑报(上下册)

电脑报社 / 西南师范大学出版社 / 2006-12-01 / 45.00元

全套上、下两册,浓缩2006年电脑报精华文章。附录包含70余篇简明IT应用指南,覆盖软件、硬盘、数码、网络四大领域。配赠权威实用的2006-2007中国计算机年鉴DVD光盘,近1.4GB海量信息与资源超值奉献。8大正版超值软件,涵盖系统维护、系统安全、办公应用、多媒体娱乐等四大领域。微软、腾讯、友立等知名厂商,新年献礼。提供2006-2007全系列硬件、数码产品资讯,兼具知识性与资料性。官方网站全......一起来看看 《电脑报(上下册)》 这本书的介绍吧!

Markdown 在线编辑器
Markdown 在线编辑器

Markdown 在线编辑器

UNIX 时间戳转换
UNIX 时间戳转换

UNIX 时间戳转换

正则表达式在线测试
正则表达式在线测试

正则表达式在线测试