内容简介：Keepalived 2.0.6 已发布，Keepalived 是一款用 C 编写的路由软件。该项目的主要目标是为 Linux 系统和基于 Linux 的基础设备提供简单而强大的负载均衡和高可用性。 更新内容： * Fix genhash digest calcula...
Keepalived 2.0.6 已发布，Keepalived 是一款用 C 编写的路由软件。该项目的主要目标是为 Linux 系统和基于 Linux 的基础设备提供简单而强大的负载均衡和高可用性。
更新内容：
* Fix genhash digest calculation. The bracketting in HASH_UPDATE was wrong.
* Bring keepalived(8) man page up to date.
* Fix segfault when IPVS_DEST_ATTR_ADDR_FAMILY not defined.
Issue #938 identified a segfault on the checker process when using
CentOS/RHEL 6. It turned out that conditional compilation check
for IPVS_DEST_ATTR_ADDR_FAMILY was not being handled correctly.
* Don't create a link-local address for vmac when vmac_xmit_base is set
Since commit 18ec95add483 ("Make vmac_xmit_base work for IPv6
instances") VRRP advertisements are sent from the base interface and not
from the vmac interface when vmac_xmit_base is set.
Therefore, there is no need to configure a link-local address on the
vmac interface. This also means that we don't need to regenerate a
link-local address for the vmac if the link-local address was removed
from the base interface, or inherit a link-local address in case one was
configured on the base interface.
* Fix setting i/f params on a bridge underlying i/f of a VMAC
Issue #944 identified that when the underlying interface of a VMAC
interface was a bridge, keepalived was failing to set arp_ignore and
arp_filter in the underlying bridge interface. The problem appears to
lie in the libnl3 library. The description of the problem given in the
issue report was:
Problem is that ifi_family is set to AF_BRIDGE, whereas it should be set
to AF_UNSPEC. The kernel function that handles RTM_SETLINK messages for
AF_BRIDGE doesn't know how to process the IFLA_AF_SPEC attribute.
This commit stops using libnl3 for setting/clearing arp_ignore and
arp_filter, and directly constructs the netlink messages in keepalived.
* Use RTM_NEWLINK rather than RTM_SETLINK for setting i/f options
libnl3 uses RTM_NEWLINK rather than RTM_SETLINK for setting
interface options when ifi_family is AF_UNSPEC, so update commit
9b2b2c9 - "Fix setting i/f params on a bridge underlying i/f of
a VMAC" to do likewise.
* Fix creating VMACs on 2.6.32 and earlier kernels
RTM_NEWLINK didn't support specifying interface by name until
Linux 2.6.33, and if using an earlier kernel, the netlink call
failed. This meant that the VMAC was not enabled.
* Fix setting arp_ignore and arp_filter on bridge interfaces.
* Add diagnostic message if vrrp script time out and kill fails.
* Fix compile errors and warnings when building with --enable-debug.
* Don't do md5 check unless configured.
* In http_handle_response() combine fetched_url and url
fetched_url and url always pointed to the same url, so only use
one variable.
* Store and handle HTTP_GET digest in binary form
Configured digests were being stored in character string form, and
the calculated digests were converted to strings. This commit now
handles digests as fixed length binary data, and validates the
configured digests to make sure they are valid hex strings with
the correct length.
* Add support for quote and escape handling of notify and other scripts.
Notify and other scripts need to be able to be configured with embedded
spaces, quotes and special characters for the command and the parameters.
This commit adds that ability.
* When checking script file path, only replace name part if same file.
Some executables are in the filesystem as symbolic links, and alter
their functionality based on the file part of the name. This was being
incorrectly handled by keepalived, which now checks whether a file exists
using the original name, and it it does whether it is the same file.
* Remove cmd_str from notify_script_t
The cmd_str string (sort of) duplicated what was in the args array
of a notify_script_t, but was not always accurate. With the removal
of cmd_str, whenever it needs to be output, the string is now
generated from the args array, so accurately reflects what is
actually executed.
* Add quoting and escaping for script configuration, and other minor changes.
* Use vsyslog() if available instead of syslog().
* Report virtual server as well as real server when config dump checker.
* Only report IP_MULTICAST_ALL unset for IPv4 sockets
Commit 6fb5980 - "Stop receive message queues not being read on send
sockets" added a warning if data was received on vrrp send sockets, since
setting IP_MULTICAST_ALL should stop packets being received, but older
kernels still queued packets.
It has now been discovered the IP_MULTICAST_ALL (of course) only applies
to IPv4 and so the warning only makes sense for IPv4 sockets.
I haven't been able to find a way to stop IPv6 multicast packets being
received on the send socket. It appears that if any socket adds an IPv6
multicast group on an interface, then any raw socket using that interface
will recieve all enabled multicast packets, and the receive socket has to
add the multicast group.
* Properly stop packets being queued on vrrp send sockets
Commit 6fb5980 - "Stop receive message queues not being read on
send sockets" did stop messages building up on the receive queue
of vrrp send sockets, but it wasn't an ideal solution, and it also
made the assumption that the problem was only occurring due to
multicast packets not being filtered when IP_MULTICAST_ALL was set,
which appears not to work properly between at least Linux 3.6.11 and
3.16. In fact the problem also occurred when using IPv4 unicast and
IPv6 in any form, and so has been a long term issue in keepalived.
The original solution was to listen on the send socket and discard any
packets that were received. This commit takes a completely different
solution (many thanks to Simon Kirby for the suggestion) and sets a
BPF filter on send sockets that filter out all received packets on the
sockets.
This commit effectively reverts commit 6fb5980, and the subsequent
commits 88c698d8 - "Cancel read thread on send sockets when closing",
f981b55d - "Only allow vrrp_rx_bufs_policy NO_SEND_RX if have
IP_MULTICAST_ALL", 7ff7ea1f - "Another fix to listening on send socket",
and 77d947f7 - "Only report IP_MULTICAST_ALL unset for IPv4 sockets"
and partially reverts 4297f0a - "Add options to set vrrp socket receive
buffer sizes".
This commit removes the configuration option NO_SEND_RX from
vrrp_tx_bufs_policy introduced in commit 4297f0a since it is now
no longer relevant, because no packets are queued to the send socket.
* Add newlines to the keepalived.stats output for better readability.
* Add notify_master_rx_lower_pri script option and FIFO output.
If a lower priority router has transitioned to master, there has presumably
been an intermittent communications break between the master and backup. It
appears that servers in an Amazon AWS environment can experience this.
The problem then occurs if a notify_master script is executed on the backup
that has just transitioned to master and the script executes something like
a `aws ec2 assign-private-ip-addresses` command, thereby removing the address
from the 'proper' master. Executing notify_master_rx_lower_pri notification
allows the 'proper' master to recover the secondary addresses.
* Fix malloc'd memory length in open_log_file().下载地址：
【声明】文章转载自：开源中国社区 [http://www.oschina.net]
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持 码农网
猜你喜欢:
- Keepalived 1.4.4 发布，C 语言编写的路由软件
- Keepalived 2.0.4 发布，C 语言编写的路由软件
- Keepalived 2.0.5 发布，C 语言编写的路由软件
- keepalived 2.0.6 发布，C 语言编写的路由软件
- Keepalived 2.0.7 发布，C 语言编写的路由软件
- Keepalived 2.0.7 发布，C 语言编写的路由软件
本站部分资源来源于网络，本站转载出于传递更多信息之目的，版权归原作者或者来源机构所有，如转载稿涉及版权问题，请联系我们。
