内容简介:Keepalived 1.4.3 发布,包含大量更新。 Keepalived 是一款用 C 编写的路由软件。该项目的主要目标是为 Linux 系统和基于 Linux 的基础设备提供简单而强大的负载均衡和高可用性。 更新: * vrrp: setting '0'...
Keepalived 1.4.3 发布,包含大量更新。
Keepalived 是一款用 C 编写的路由软件。该项目的主要目标是为 Linux 系统和基于 Linux 的基础设备提供简单而强大的负载均衡和高可用性。
更新:
* vrrp: setting '0' as default value for ifa_flags to make gcc happy. * Add additional libraries when testing for presence of SSL_CTX_new(). It appears that some systems need -lcrypto when linking with -lssl. * Sanitise checking of libnl3 in configure.ac. * Report and handle missing '}'s in config files. * Add missing '\n' in keepalived.data output. * Stop backup taking over as master while master reloads. If a reload was initiated just before an advert, and since it took one advert interval after a reload before an advert was sent, if the reload itself took more than one advert interval, the backup could time out and take over as master. This commit makes keepalived send adverts for all instances that are master immediately before a reload, and also sends adverts immediately after a reload, thereby trippling the time available for the reload to complete. * Add route option fastopen_no_cookie and rule option l3mdev. * Fix errors in KEEPALIVED-MIB.txt. * Simplify setting on IN6_ADDR_GEN_MODE. * Cosmetic changes to keepalived(8) man page. * Don't set ipvs sync daemon to master state before becoming master If a vrrp instance which was the one specified for the ipvs sync daemon was configured with initial state master, the sync daemon was being set to master mode before the vrrp instance transitioned to master mode. This caused an error message when the vrrp instance transitioned to master and attempted to make the sync daemon go from backup to master mode. This commit stops setting the sync daemon to master mode at initialisation time, and it is set to master mode when the vrrp instance transitions to master. * Fix freeing vector which has not had any entries allocated. * Add additional mem-check disgnostics vector_alloc, vectot_alloc_slot, vector_free and alloc_strvec all call MALLOC/FREE but the functions written in the mem_check log are vector_alloc etc, not the functions that call them. This commit adds logging of the originating calling function. * Fix memory leak in parser.c. * Improve alignment of new mem-check logging. * Disable all checkers on a virtual server when ha_suspend set. Only the first checker was being disabled; this commit now disables all of them. Also, make the decision to disable a checker when starting/reloading when scheduling the checker, so that the existance of the required address can be checked. * Stop genhash segfaulting when built with --enable-mem-check. * Fix memory allocation problems in genhash. * Properly fix memory allocation problems in genhash. * Fix persistence_granularity IPv4 netmask validation. The logic test from inet_aton() appears to be inverted. * Fix segfault when checker configuration is missing expected parameter Issue #806 mentioned as an aside that "nb_get_retry" without a parameter was sigfaulting. Commit be7ae80 - "Stop segfaulting when configuration keyword is missing its parameter" missed the "hidden" uses of vector_slot() (i.e. those used via definitions in header files). This commit now updates those uses of vector_slot() to use strvec_slot() instead. * Fix compiling on Linux 2.x kernels. There were missing checks for HAVE_DECL_CLONE_NEWNET causing references to an undeclared variable if CLONE_NEWNET wasn't defined. * Improve parsing of kernel release. The kernel EXTRAVERSION can start with any character (although starting with a digit would be daft), so relax the check for it starting with a '-'. Kernels using both '+' and '.' being the first character of EXTRAVERSION have been reported. * Improve grammer. * add support for SNI in SSL_GET check. this adds a `enable_sni` parameter to SSL_GET, making sure the check passes the virtualhost in the SNI extension during SSL handshake. * Optimise setting host name for SSL_GET requests with SNI. * Allow SNI to be used with SSL_GET with OpenSSL v1.0.0 and LibreSSL. * Use configure to check for SSL_set_tlsext_host_name() Rather than checking for a specific version of the OpenSSL library (and it would also need checking the version of the LibreSSL library) let configure check for the presence of SSL_set_tlsext_host_name(). Also omit all code related to SNI of SSL_set_tlsext_host_name() is not available. * Use configure to determine available OpenSSL functionality Rather than using version numbers of the OpenSSL library to determine what functions are available, let configure determine whether the functions are supported. The also means that the same tests work for LibreSSL. * Add support for gratuitous ARPs for IP over Infiniband. * Use system header definition instead of local definition IF_HWADDR_MAX linux/netdevice.h has definition MAX_ADDR_LEN, which is 32, whereas IF_HWADDR_MAX was locally defined to be 20. Unfortunately we end up with more system header file juggling to ensure we don't have duplicate definitions. * Fix vrrp_script and check_misc scripts of type </dev/tcp/127.0.0.1/80. * Add the first pre-defined config definition (${_PWD}) ${_PWD} in a configuration file will be replaced with the full path name of the directory that keepalived is reading the current configuration file from. * Open and run the notify fifo and script if no other fifo Due to the way the code was structured the notify_fifo for both checker and vrrp messages wasn't run if neither the vrrp or checker fifo wasn't configured. Also, if all three fifos were configured, the general fifo script was executed by both the vrrp and checker process, causing problems. * Add support for Infiniband interfaces when dumping configuration. * Tidy up layout in vrrp_arp.c. * Add configure check for support of position independant executables (PIE). * Add check for -pie support, and fix writing to keepalived.data.
下载地址:Keepalived for Linux - Version 1.4.3
【声明】文章转载自:开源中国社区 [http://www.oschina.net]
以上所述就是小编给大家介绍的《Keepalived 1.4.3 发布,包含大量更新》,希望对大家有所帮助,如果大家有任何疑问请给我留言,小编会及时回复大家的。在此也非常感谢大家对 码农网 的支持!
猜你喜欢:- ThinkCMF 5.0.181212 发布,包含安全更新
- TensorFlow 1.3.0 正式发布,包含诸多更新
- ReSharper Ultimate 2018.1 发布,包含系列更新
- ThinkPHP 发布 5.1.33 版本——包含安全更新
- ThinkPHP 发布 5.1.33 版本——包含安全更新
- ReSharper Ultimate 2017.3 正式发布,包含重要更新
本站部分资源来源于网络,本站转载出于传递更多信息之目的,版权归原作者或者来源机构所有,如转载稿涉及版权问题,请联系我们。
Learn Python 3 the Hard Way
Zed A. Shaw / Addison / 2017-7-7 / USD 30.74
You Will Learn Python 3! Zed Shaw has perfected the world’s best system for learning Python 3. Follow it and you will succeed—just like the millions of beginners Zed has taught to date! You bring t......一起来看看 《Learn Python 3 the Hard Way》 这本书的介绍吧!