内容简介:The articles in this series have mainly focused on Perl’s ability to manipulate text. Perl was designed to manipulate and analyze. But Perl is capable of much more. More complex problems often require working with sets of data objects and indexing and comp
The articles in this series have mainly focused on Perl’s ability to manipulate text. Perl was designed to manipulate and analyze. But Perl is capable of much more. More complex problems often require working with sets of data objects and indexing and comparing them in elaborate ways to compute some desired result.
For working with sets of data objects, Perl provides arrays and hashes . Hashes are also known as associative arrays or dictionaries . This article will prefer the term hash because it is shorter.
The remainder of this article builds on the previous articles in this series by demonstrating basic use of arrays and hashes in Perl.
An example Perl program
Copy and paste the below code into a plain text file and use the same one-liner that was provided in the the first article of this series to strip the leading numbers. Name the version without the line numbers chip2.pm and move it into the hal subdirectory. Use the version of the game that was provided inthe second article so that the below chip will automatically load when placed in the hal subdirectory.
00 # advanced operations chip 01 02 package chip2; 03 require chip1; 04 05 use strict; 06 use warnings; 07 08 use constant SCORE=>' 09 ┌───┬───┬───┐ 10 │ 3 │ 2 │ 3 │ 11 ├───┼───┼───┤ 12 │ 2 │ 4 │ 2 │ 13 ├───┼───┼───┤ 14 │ 3 │ 2 │ 3 │ 15 └───┴───┴───┘ 16 '; 17 18 sub get_prob { 19 my $game = shift; 20 my @nums; 21 my %odds; 22 23 while ($game =~ /[1-9]/g) { 24 $odds{$&} = substr(SCORE, $-[0], 1); 25 } 26 27 @nums = sort { $odds{$b} <=> $odds{$a} } keys %odds; 28 29 return $nums[0]; 30 } 31 32 sub win_move { 33 my $game = shift; 34 my $mark = shift; 35 my $tkns = shift; 36 my @nums = $game =~ /[1-9]/g; 37 my $move; 38 39 TRY: for (@nums) { 40 my $num = $_; 41 my $try = $game =~ s/$num/$mark/r; 42 my $vic = chip1::get_victor $try, $tkns; 43 44 if (defined $vic) { 45 $move = $num; 46 last TRY; 47 } 48 } 49 50 return $move; 51 } 52 53 sub hal_move { 54 my $game = shift; 55 my $mark = shift; 56 my @mark = @{ shift; }; 57 my $move; 58 59 $move = win_move $game, $mark, \@mark; 60 61 if (not defined $move) { 62 $mark = ($mark eq $mark[0]) ? $mark[1] : $mark[0]; 63 $move = win_move $game, $mark, \@mark; 64 } 65 66 if (not defined $move) { 67 $move = get_prob $game; 68 } 69 70 return $move; 71 } 72 73 sub complain { 74 print "My mind is going. I can feel it.\n"; 75 } 76 77 sub import { 78 no strict; 79 no warnings; 80 81 my $p = __PACKAGE__; 82 my $c = caller; 83 84 *{ $c . '::hal_move' } = \&{ $p . '::hal_move' }; 85 *{ $c . '::complain' } = \&{ $p . '::complain' }; 86 } 87 88 1;
How it works
In the above example Perl module, each position on the Tic-Tac-Toe board is assigned a score based on the number of winning combinations that intersect it. The center square is crossed by four winning combinations – one horizontal, one vertical, and two diagonal. The corner squares each intersect one horizontal, one vertical, and one diagonal combination. The side squares each intersect one horizontal and one vertical combination.
The get_prob subroutine creates a hash named odds (line 21) and uses it to map the numbers on the current game board to their score (line 24). The keys of the hash are then sorted by their score and the resulting list is copied to the nums array (line 27). The get_prob subroutine then returns the first element of the nums array ($nums[0]) which is the number from the original game board that has the highest score.
The algorithm described above is an example of what is called a heuristic in artificial intelligence programming. With the addition of this module, the Tic-Tac-Toe game can be considered a very rudimentary artificial intelligence program. It is really just playing the odds though and it is quite beatable. The next module (chip3.pm) will provide an algorithm that actually calculates the best possible move based on the opponent’s counter moves.
The win_move subroutine simply tries placing the provided mark in each available position and passing the resulting game board to chip1’s get_victor subroutine to see if it contains a winning combination. Notice that the r flag is being passed to the substitution operation (s/$num/$mark/r) on line 41 so that, rather than modifying the original game board, a new copy of the board containing the substitution is created and returned.
Arrays
It was mentioned in part one that arrays are variables whose names are prefixed with an at symbol ( @ ) when they are created. In Perl, these prefixed symbols are called sigils.
Context
In Perl, many things return a different value depending on the context in which they are accessed. The two contexts to be aware of are called scalar context and list context. In the following example, $ value1 and $ value2 are different because @ nums is accessed first in scalar context and then in list context.
$value1 = @nums; ($value2) = @nums;
In the above example, it might seem like @ nums should return the same value each time it is accessed, but it doesn’t because what is accessing it (the context) is different. $ value1 is a scalar, so it receives the scalar value of @ nums which is its length. ($ value2 ) is a list, so it receives the list value of @ nums . In the above example, $ value2 will receive the value of the first element of the nums array.
In part one, the below statement from the get_mark subroutine copied the numbers from the current Tic-Tac-Toe board into an array named nums .
@nums = $game =~ /[1-9]/g
Since the nums array in the above statement receives one copy of each board number in each of its elements, the count of the board numbers is equal to the length of the array. In Perl, the length of an array is obtained by accessing it in scalar context .
Next, the following formula was used to compute which mark should be placed on the Tic-Tac-Toe board in the next turn.
$indx = (@nums+1) % 2;
Because the plus operator requires a single value (a scalar) on its left hand side, not a list of values, the nums array evaluates to its length, not the list of its values. The parenthesis, in the above example, are just being used to set the order of operations so that the addition (+) will happen before the modulo (%).
Copying
In Perl you can create a list for immediate use by surrounding the list values with parenthesis and separating them with commas. The following example creates a three-element list and copies its values to an array.
@nums = (4, 5, 6);
As long as the elements of the list are variables and not constants, you can also copy the elements of an array to a list:
($four, $five, $six) = @nums;
If there were more elements in the array than the list in the above example, the extra elements would simply be discarded.
Different from lists in scalar context
Be aware that lists and arrays are different things in Perl. A list accessed in scalar context returns its last value, not its length. In the following example, $ value3 receives 3 (the length of @ nums ) while $ value4 receives 6 (the last element of the list).
$value3 = @nums; $value4 = (4, 5, 6);
Indexing
To access an individual element of an array or list, suffix it with the desired index in square brackets as shown on line 29 of the above example Perl module.
Notice that the nums array on line 29 is prefixed with the dollar sigil ($) rather than the at sigil (@). This is done because the get_prob subroutine is supposed to return a single value, not a list. If @nums[0] were used instead of $nums[0], the subroutine would return a one-element list. Since a list evaluates to its last element in scalar context, this program would probably work if I had used @nums[0], but if you mean to retrieve a single element from an array, be sure to use the dollar sigil ($), not the at sigil (@).
It is possible to retrieve a subset from an array (or a list) rather than just one value in which case you would use the at sigil and you would provide a series of indexes or a range instead of a single index. This is what is known in Perl as a list slice .
Hashes
Hashes are variables whose names are prefixed with the percent sigil (%) when they are created. They are subscripted with curly brackets ({}) when accessing individual elements or subsets of elements (hash slices). Like arrays, hashes are variables that can hold multiple discrete data elements. They differ from arrays in the following ways:
- Hashes are indexed by strings (or anything that can be converted to a string), not numbers.
- Hashes are unordered. If you retrieve a list of their keys, values or key-value pairs, the order of the listing will be random.
- The number of elements in the hash will be equal to the number of keys that have been assigned values. If a value is assigned to index 99 of an array that has only three elements (indexes 0-2), the array will grow to a length of 100 elements (indexes 0-99). If a value is assigned to a new key in a hash that has only three elements, the hash will grow by only one element.
As with arrays, if you mean to access (or assign to) a single element of a hash, you should prefix it with the dollar sigil ($). When accessing a single element, Perl will go by the type of the subscript to determine the type of variable being accessed – curly brackets ({}) for hashes or square brackets ([]) for arrays. The get_prob subroutine in the above Perl module demonstrates assigning to and accessing individual elements of a hash.
Perl has two special built-in functions for working with hashes – keys and values . The keys function, when provided a hash, returns a list of all the hash’s keys (indexes). Similarly, the values function will return a list of all the hash’s values. Remember though that the order in which the list is returned is random. This randomness can be seen when playing the Tic-Tac-Toe game. If there is more than one move available with the highest score, the computer will chose one at random because the keys function returns the available moves from the odds hash in random order.
On line 27 of the above example Perl module, the keys function is being used to retrieve the list of keys from the odds hash. The keys of the odds hash are the numbers that were found on the current game board. The values of the odds hash are the corresponding probabilities that were retrieved from the SCORE constant on line 24.
Admittedly, this example could have used an array instead of a string to store and retrieve the scores. I chose to use a string simply because I think it presents the layout of the board a little nicer. An array would likely perform better, but with such a small data set, the difference is probably too small to measure.
Sort
On line 27, the list of keys from the odds hash is being feed to Perl’s built-in sort function. Beware that Perl’s sort function sorts lexicographically by default, not numerically. For example, provided the list (10, 9, 8, 1), Perl’s sort function will return the list (1, 10, 8, 9).
The behavior of Perl’s sort function can be modified by providing it a code block as its first parameter as demonstrated on line 27. The result of the last statement in the code block should be a number less-than, equal-to, or greater-than zero depending on whether element $a should be placed before, concurrent-with, or after element $b in the resulting list respectively. $a and $b are pairs of elements from the provided list. The code in the block is executed repeatedly with $a and $b set to different pairs of elements from the original list until all the pairs have been compared and sorted.
The <=> operator is a special Perl operator that returns -1, 0, or 1 depending on whether the left argument is numerically less-than, equal-to, or greater-than the right argument respectively. By using the <=> operator in the code block of the sort function, Perl’s sort function can be made to sort numerically rather than lexicographically.
Notice that rather than comparing $a and $b directly, they are first being passed through the odds hash. Since the values of the odds hash are the probabilities that were retrieved from the SCORE constant, what is being compared is actually the score of $a versus the score of $b . Consequently, the numbers from the original game board are being sorted by their score, not their value. Numbers with an equal score are left in the same random order that the keys function returned them.
Notice also that I have reversed the typical order of the parameters to <=> in the code block of the sort function ( $b on the left and $a on the right). By switching their order in this way, I have caused the sort function to return the elements in reverse order – from greatest to least – so that the number(s) with the highest score will be first in the list.
References
References provide an indirect means of accessing a variable. They are often used when making copies of the variable is either undesirable or impractical. References are a sort of short cut that allows you to skip performing the copy and instead provide access to the original variable.
Why to use references
There is a cost in time and memory associated with making copies of variables. References are sometimes used as a means of reducing that cost. Be aware, however, that recent versions of Perl implement a technology called copy-on-write that greatly reduces the cost of copying variables. This new optimization should work transparently. You don’t have to do anything special to enable the copy-on-write optimization.
Why not to use references
References violate the action-at-a-distance principle that was mentioned in part one of this series. References are just as bad as global variables in terms of their tendency to trip up programmers by allowing data to be modified outside the local scope. You should generally try to avoid using references. But there are times when they are necessary.
How to create references
An example of passing a reference is provided on line 59 of the above Perl module. Rather than placing the mark array directly in the list of parameters to the win_move subroutine, a reference to the array is provided instead by prefixing the variable’s sigil with a backslash (\).
It is necessary to use a reference (\@mark) on line 59 because if the array were placed directly on the list, it would expand such that the first element of the mark array would become the third parameter to the win_move function, the second element of the mark array would become the fourth parameter to the win_move function, and so on for as many elements as the mark array has. Whereas an array will expand in list context, a reference will not. If the array were passed in expanded form, the receiving subroutine would need to call shift once for each element of the array. Also, the receiving function would not be able to tell how long the original array was.
Three ways to dereference references
In the receiving subroutine, the reference has to be dereferenced to get at the original values. An example of dereferencing an array reference is provided on line 56. On line 56, the shift statement has been enclosed in curly brackets and the opening bracket has been prefixed with the array sigil (@).
There is also a shorter form for dereferencing an array reference that is demonstrated on line 43 of the chip1.pm module . The short form allows you to omit the curly brackets and instead place the array sigil directly in front of the sigil of the scalar that holds the array reference. The short form only works when you have an array reference stored in a scalar. When the array reference is coming from a function, as it is on line 56 of the above Perl module, the long form must be used.
There is yet a third way of dereferencing an array reference that is demonstrated on line 29 of the game script. Line 29 shows the MARKS array reference being dereferenced with the arrow operator (->) and an index enclosed in square brackets. The MARKS array reference is missing its sigil because it is a constant. You can tell that what is being dereferenced is an array reference because the arrow operator is followed by square brackets ([]). Had the MARKS constant been a hash reference, the arrow operator would have been followed by curly brackets ({}).
There are also corresponding long and short forms for dereferencing hash references that use the hash sigil (%) instead of the array sigil. Note also that hashes, just like arrays, need to be passed by reference to subroutines unless you want them to expand into their constituent elements. The latter is sometimes done in Perl as a clever way of emulating named parameters .
A word of caution about references
It was stated earlier that references allow data to be modified outside of their declared scope and, just as with global variables, this non-local manipulation of the data can be confusing to the programmer(s) and thereby lead to unintended bugs. This is an important point to emphasize and explain.
On line 35 of the win_move subroutine, you can see that I did not dereference the provided array reference (\@mark) but rather I chose to store the reference in a scalar named tkns . I did this because I do not need to access the individual elements of the provided array in the win_move subroutine. I only need to pass the reference on to the get_victor subroutine. Not making a local copy of the array is a short cut, but it is dangerous. Because $ tkns is only a copy of the reference , not a copy of the original data being referred to, if I or a later program developer were to write something like $tkns->[0] = ‘Y’ in the win_move subroutine, it would actually modify the value of the mark array in the hal_move subroutine. By passing a reference to its mark array (\@mark) to the win_move subroutine, the hal_move subroutine has granted access to modify its local copy of @ mark . In this case, it would probably be better to make a local copy of the mark array in the win_move subroutine using syntax similar to what is shown on line 56 rather than preserving the reference as I have done for the purpose of demonstration on line 35.
Aliases
In addition to references, there is another way that a local variable created with the my or state keyword can leak into the scope of a called subroutine. The list of parameters that you provide to a subroutine is directly accessible in the @_ array .
To demonstrate, the following example script prints b , not a , because the inc subroutine accesses the first element of @_ directly rather than first making a local copy of the parameter.
#!/usr/bin/perl sub inc { $_[0]++; } MAIN: { my $var = 'a'; inc $var; print "$var\n"; }
Aliases are different from references in that you don’t have to dereference them to get at their values. They really are just alternative names for the same variable. Be aware that aliases occur in a few other places as well. One such place is the list returned from the sort function – if you were to modify an element of the returned list directly, without first copying it to another variable, you would actually be modifying the element in the original list that was provided to the sort function. Other places where aliases occur include the code blocks of functions like grep and map . The grep and map functions are not covered in this series of articles. See the provided links if you want to know more about them.
Final notes
Many of Perl’s built-in functions will operate on the default scalar ( $_ ) or default array ( @_ ) if they are not explicitly provided a variable to read from or write to. Line 40 of the above Perl module provides an example. The numbers from the nums array are sequentially aliased to $_ by the for keyword. If you chose to use these variables, in most cases you will probably want to retrieve your data from $_ or @_ fairly quickly to prevent it being accidentally overwritten by a subsequent command.
The substitution command (s/…/…/), for example, will manipulate the data stored in $_ if it is not explicitly bound to another variable by one of the =~ or !~ operators. Likewise, the shift function operates on @_ (or @ ARGV if called in the global scope) if it is not explicitly provided an array to operate on. There is no obvious rule to which functions support this shortcut. You will have to consult the documentation for the command you are interested in to see if it will operate on a default variable when not provided one explicitly.
As demonstrated on lines 55 and 56, the same name can be reused for variables of different types. Reusing variable names generally makes the code harder to follow. It is probably better for the sake of readability to avoid variable name reuse.
Beware that making copies of arrays or hashes in Perl (as demonstrated on line 56) is shallow by default. If any of the elements of the array or hash are references, the corresponding elements in the duplicated array or hash will be references to the same original data. To make deep copies of data structures, use one of the Clone or Storable Perl modules. An alternative workaround that may work in the case of multi-dimensional arrays is to emulate them with a one-dimensional hash .
Similar in form to Perl’s syntax for creating lists – (1, 2, 3) – unnamed array references and unnamed hash references can be constructed on the fly by bounding a comma-separated set of elements in square brackets ( [] ) or curly brackets ( {} ) respectively. Line 07 ofthe game script demonstrates an unnamed (anonymous) array reference being constructed and assigned to the MARKS constant.
Notice that the import subroutine at the end of the above Perl module (chip2.pm) is assigning to some of the same names in the calling namespace as the previous module (chip1.pm). This is intentional. The hal_move and complain aliases created by chip1’s import subroutine will simply be overridden by the identically named aliases created by chip2’s import subroutine (assuming chip2.pm is loaded after chip1.pm in the calling namespace). Only the aliases are updated/overridden. The original subroutines from chip1 will still exist and can still be called with their full names – chip1::hal_move and chip1::complain .
以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持 码农网
猜你喜欢:本站部分资源来源于网络,本站转载出于传递更多信息之目的,版权归原作者或者来源机构所有,如转载稿涉及版权问题,请联系我们。
重新定义团队:谷歌如何工作
拉兹洛·博克 / 宋伟 / 中信出版集团 / 2015-12-1 / CNY 56.00
谷歌首席人才官拉斯洛•博克权威力作,谷歌公开认可的谷歌高层作品,首度揭秘谷歌颠覆工业时代模式的人才和团队管理的核心法则,《纽约时报》畅销榜第一名,Business Insider 2015最佳商业书籍,谷歌的创造力就在于此! 编辑推荐! 1、 谷歌人才官首次公开谷歌人才和团队管理的核心秘籍 在谷歌执掌人事多年的拉斯洛•博克是人才和团队管理的顶级专家。他加入谷歌后,谷歌的员工数从六......一起来看看 《重新定义团队:谷歌如何工作》 这本书的介绍吧!