内容简介:Positive Technologies specialists have discovered an error in Intel hardware, as well as an error in Intel CSME firmware at the very early stages of the subsystem's operation, in its boot ROM. Intel CSME is responsible for initial authentication of Intel-b
The scenario that Intel system architects, engineers, and security specialists perhaps feared most is now a reality. A vulnerability has been found in the ROM of the Intel Converged Security and Management Engine (CSME). This vulnerability jeopardizes everything Intel has done to build the root of trust and lay a solid security foundation on the company's platforms. The problem is not only that it is impossible to fix firmware errors that are hard-coded in the Mask ROM of microprocessors and chipsets. The larger worry is that, because this vulnerability allows a compromise at the hardware level, it destroys the chain of trust for the platform as a whole.
Positive Technologies specialists have discovered an error in Intel hardware, as well as an error in Intel CSME firmware at the very early stages of the subsystem's operation, in its boot ROM. Intel CSME is responsible for initial authentication of Intel-based systems by loading and verifying all other firmware for modern platforms. For instance, Intel CSME interacts with CPU microcode to authenticate UEFI BIOS firmware using BootGuard. Intel CSME also loads and verifies the firmware of the Power Management Controller responsible for supplying power to Intel chipset components.
Even more importantly, Intel CSME is the cryptographic basis for hardware security technologies developed by Intel and used everywhere, such as DRM, fTPM, and Intel Identity Protection. In its firmware, Intel CSME implements EPID (Enhanced Privacy ID). EPID is a procedure for remote attestation of trusted systems that allows identifying individual computers unambiguously and anonymously, which has a number of uses: these include protecting digital content, securing financial transactions, and performing IoT attestation. Intel CSME firmware also implements the TPM software module, which allows storing encryption keys without needing an additional TPM chip—and many computers do not have such chips.
Intel tried to make this root of trust as secure as possible. Intel's security is designed so that even arbitrary code execution in any Intel CSME firmware module would not jeopardize the root cryptographic key (Chipset Key), but only the specific functions of that particular module. Plus, as the thinking went, any risks could be easily mitigated by changing encryption keys via the security version number (SVN) mechanism. This was demonstrated in 2017, when an arbitrary code execution vulnerability was found in the BringUP (bup) firmware module, as described in Intel SA-00086. At that time, Intel simply generated new keys by incrementing the SVN, easily preventing any compromise of EPID-based technologies.
Unfortunately, no security system is perfect. Like all security architectures, Intel's had a weakness: the boot ROM, in this case. An early-stage vulnerability in ROM enables control over reading of the Chipset Key and generation of all other encryption keys. One of these keys is for the Integrity Control Value Blob (ICVB). With this key, attackers can forge the code of any Intel CSME firmware module in a way that authenticity checks cannot detect. This is functionally equivalent to a breach of the private key for the Intel CSME firmware digital signature, but limited to a specific platform.
The EPID issue is not too bad for the time being because the Chipset Key is stored inside the platform in the One-Time Programmable (OTP) Memory, and is encrypted. To fully compromise EPID, hackers would need to extract the hardware key used to encrypt the Chipset Key, which resides in Secure Key Storage (SKS). However, this key is not platform-specific. A single key is used for an entire generation of Intel chipsets. And since the ROM vulnerability allows seizing control of code execution before the hardware key generation mechanism in the SKS is locked, and the ROM vulnerability cannot be fixed, we believe that extracting this key is only a matter of time. When this happens, utter chaos will reign. Hardware IDs will be forged, digital content will be extracted, and data from encrypted hard disks will be decrypted.
The vulnerability discovered by Positive Technologies affects the Intel CSME boot ROM on all Intel chipsets and SoCs available today other than Ice Point (Generation 10). The vulnerability allows extracting the Chipset Key and manipulating part of the hardware key and the process of its generation. However, currently it is not possible to obtain that key's hardware component (which is hard-coded in the SKS) directly. The vulnerability also sets the stage for arbitrary code execution with zero-level privileges in Intel CSME.
We will provide more technical details in a full-length white paper to be published soon. We should point out that when our specialists contacted Intel PSIRT to report the vulnerability, Intel said the company was already aware of it (CVE-2019-0090). Intel understands they cannot fix the vulnerability in the ROM of existing hardware. So they are trying to block all possible exploitation vectors. The patch for CVE-2019-0090 addresses only one potential attack vector, involving the Integrated Sensors Hub (ISH). We think there might be many ways to exploit this vulnerability in ROM. Some of them might require local access; others need physical access.
As a sneak peek, here are a few words about the vulnerability itself:
1. The vulnerability is present in both hardware and the firmware of the boot ROM. Most of the IOMMU mechanisms of MISA (Minute IA System Agent) providing access to SRAM (static memory) of Intel CSME for external DMA agents are disabled by default . We discovered this mistake by simply reading the documentation, as unimpressive as that may sound.
2. Intel CSME firmware in the boot ROM first initializes the page directory and starts page translation. IOMMU activates only later. Therefore, there is a period when SRAM is susceptible to external DMA writes (from DMA to CSME, not to the processor main memory), and initialized page tables for Intel CSME are already in the SRAM.
3. MISA IOMMU parameters are reset when Intel CSME is reset. After Intel CSME is reset, it again starts execution with the boot ROM.
Therefore, any platform device capable of performing DMA to Intel CSME static memory and resetting Intel CSME (or simply waiting for Intel CSME to come out of sleep mode) can modify system tables for Intel CSME pages, thereby seizing execution flow.
Author : Mark Ermolov, Positive Technologies
以上就是本文的全部内容,希望本文的内容对大家的学习或者工作能带来一定的帮助,也希望大家多多支持 码农网
猜你喜欢:本站部分资源来源于网络,本站转载出于传递更多信息之目的,版权归原作者或者来源机构所有,如转载稿涉及版权问题,请联系我们。